Home > Electrical > Trim Tabs & Accessories
Sort By:
1
Johson/Evinrude/Volvo/Mercury Relay Johson/Evinrude/Volvo/Mercury Relay

Power Trim Relay (Sierra)
O.E.M. - OMC, Volvo
- Replaces: OMC: 582472, 584416, 586224, Volvo: 876039
- For: AQ 175, 200, 225D, 260, 290A
- 5 Terminal, Single Pull, Double Throw, 12 Volt
- Contact/Resistive/Conductive

Open/40 Amps/30Amps
Closed/20 Amps/15 Amps

Our Price: $18.69
Trim Relay Trim Relay

Trim Relay (Sierra)
O.E.M. - Volvo
- Replaces: 3858081, 3858809
- For: (1998 SX-M-MAC, MDA, MLT), 3.0GLP-D, 4.3GL-E, 4.3GL-EF, 4.3GXi-F, 4.3GXi-FF, 4.3OSi-F, 4.3OSi-FF, 5.0GL-F,
5.0GL-FF, 5.0GXi-F, 5.0GXi-FF, 5.0Si-F, 5.0Si-FF, 5.7Gi/F/FF, 5.7GXi-G/GF, 5.7OSi-E/EF, 5.7OXi-E/EF, 5.7GiI-F, 5.7GXi-G,
8.1Gi-G/GF, 8.1GXI-F/FF, 8.1OSi-C/CF, 8.1GiI-G, 8.1GXiI-F, DPH-A, DPH-B, DPR-A, DPH-B, EF drives, SX-M TSKs 1998-05, SX-M, DP-SM, (WT drives, PJX-C, PJX-S SX-M, -MACLT, -MDA, -MDB, -MHP, -MTD, DP-E, DP-S, -S1, S2, DP-SM, -SM) XDP-B

Our Price: $21.75
Conversion Wire Harness Conversion Wire Harness

Conversion Wire Harness (API Marine)
- Mercury Yamaha
- 3 wire to 2 wire harness w/relays
- Use this harness to convert Mercury & Yamaha 3-wire systems to 2-wire
- Use with: API Marine PT-475TN-4, PT-476NMK-3. PT-485NMK-3, PT-495NK-3, PT608NK, PT609NK & PT612NK
- API 2-wire motors have a lower amp draw than the O/E 3-wire motors

Our Price: $41.69
SOL VALVE RED TRIM TAB BENNET SOL VALVE RED TRIM TAB BENNET

Trim Tab Solenoid Valve (Bennet)
- Red
- Directs the flow of fluid to correct actuator.
- Used in conjunction with Bennet trim tab solenoid Valve. (Green)

Our Price: $63.99
SOL VALVE GREEN TRIM TAB SOL VALVE GREEN TRIM TAB

Trim Tab Solenoid Valve (Bennet)
- Green
- Directs the flow of fluid to correct actuator.
- Used in conjunction with Bennet trim tab solenoid Valve. (Green)

Our Price: $66.00
Pro Trim Single Switch Pro Trim Single Switch

Pro Trim Bezel Switch (Teleflex)
- Single switch
- Allows you to control one function, such as trim or jackplate
- Fits Teleflex steering systems and other brands of mechanical steering
- Includes switch assembly, function decals, wiring, mounting hardware and instructions

Our Price: $106.49
Rocker Switch Euro Trim Tab Rocker Switch Euro Trim Tab

Rocker Switch Trim Tab (Bennett)
- Attractive, ergonomic design

- Positive click action for precise trim tab adjustment
- Economical and easy installation

Our Price: $119.95
Pro Trim Dual Switch Pro Trim Dual Switch

Pro Trim Bezel Switch (Teleflex)
- Dual switch
- Allows you to control any two functions, such as trim and jackplate or horn
- Fits Teleflex steering systems and other brands of mechanical steering
- Includes switch assembly, function decals, wiring, mounting hardware and instructions

Our Price: $180.99
Actuator Standard 2-1/4 Actuator Standard 2-1/4

Actuator Replacement 101 (Lenco)
- Leads: 6''
- 12 Volt
- Hardware: 5/16''
- Overall Length: 12-1/8''
- 2 - 1/4'' Stroke Actuator With 6' Lead and Deutsch Connector


Our Price: $295.99
Hydraulic Power Unit, Bennett Hydraulic Power Unit, Bennett

Trim Tab Power Unit (Bennet)
- 12 Volt
- Uses two solenoids to direct flow to actuators.
- Clear fiberglass cover allows for easy fluid checking
.

Our Price: $399.00
TRIM TAB KIT 9 X 12 TRIM TAB KIT 9 X 12

Trim Tab Kit (Lenco)
- For Use on 16' to 25' Boats
-
High Impact Corrosion Proof Mounts
-
Switch is NOT Included
-
Kit Includes:
  • (2) 101 Actuators w/ 6 Foot Leads
  • (2) Stainless Steel Trim Tab Plates made from 12 Gauge 304 Stainless with a 5/8" flared trailing edge.
  • 20' Actuator Extension Wiring Harnesses
  • All SS Mounting Hardware is included
- Minimum height on transom for this kit is 14 Inches.
- FULLY SUBMERSIBLE

Our Price: $750.00
Trim Tab Kit Blk 9 x 9 W/Joy Sti Trim Tab Kit Blk 9 x 9 W/Joy Sti

Electromechanical Trim Tabs (UFLEX)
Improve fuel economy and passenger comfort with Uflex electromechanical trim tabs. Featuring electropolished stainless steel planes and low consumption, high speed, composite actuators, these tabs are built to last in the most demanding sea conditions.
Uflex trim tabs have been specifically designed for easy installation using a quick connect bracket-actuator, requiring only one small hole per tab through the transom. The patented transom mounting bracket encapsulates the wiring to ensure protection against any wiring damage.

Uflex trim tab systems are available in 2 versions:

- MTC systems for compact installations

- MTS systems for standard installations

- Features:

- Operating system with hardened steel ballscrew, suitable to withstand high push loads.
- Prompt and easy control with the innovative use of a Joystick (PATENTED)
- AUTO-LINEUP: automatic flap re-alignment function
- Completely sealed thermoplastic resin tab actuators: maximum protection guaranteed by dual seals and a rubber bellow (PATENTED)
- Stainless steel rod and tabs
- The innovative profile of the tabs increases the efficiency of the system
- The stainless steel top surface of the tabs is mirror polished to give higher resistance to marine environment.
- Non polished stainless steel tabs also available.
- Hole hinge design (PATENTED) allows for precise retrofit replacement with Lenco® and Bennett® same size tabs
- Fully maintenance free
- Voltage: 12V DC
- Waterproof: IP68 protection
- CE Certification
- Meets with the EN60945 standards

Our Price: $830.00
Trim Tab Kit Blk 9x12 W/Joy Stic Trim Tab Kit Blk 9x12 W/Joy Stic

Electromechanical Trim Tabs (UFLEX)
Improve fuel economy and passenger comfort with Uflex electromechanical trim tabs. Featuring electropolished stainless steel planes and low consumption, high speed, composite actuators, these tabs are built to last in the most demanding sea conditions.
Uflex trim tabs have been specifically designed for easy installation using a quick connect bracket-actuator, requiring only one small hole per tab through the transom. The patented transom mounting bracket encapsulates the wiring to ensure protection against any wiring damage.

Uflex trim tab systems are available in 2 versions:

- MTC systems for compact installations

- MTS systems for standard installations
- Features:
- Operating system with hardened steel ballscrew, suitable to withstand high push loads.
- Prompt and easy control with the innovative use of a Joystick (PATENTED)

- AUTO-LINEUP: automatic flap re-alignment function
- Completely sealed thermoplastic resin tab actuators: maximum protection guaranteed by dual seals and a rubber bellow (PATENTED)
- Stainless steel rod and tabs
- The innovative profile of the tabs increases the efficiency of the system
- The stainless steel top surface of the tabs is mirror polished to give higher resistance to marine environment.
-
Non polished stainless steel tabs also available.
- Hole hinge design (PATENTED) allows for precise retrofit replacement with Lenco® and Bennett® same size tabs
- Fully maintenance free
- Voltage: 12V DC
- Waterproof: IP68 protection
- CE Certification
- Meets with the EN60945 standards

Our Price: $845.00
   
 
1
NEED HELP FILL OUT OUR -> PARTS REQUEST FORM