Home > Maintenance > Fuel & Motor Accessories > Fuel Hose
Sort By:
1
Fuel Line Assy Universal 5/16H Fuel Line Assy J/E Gas Fill Vent Combo Chrm
Fuel Line Assy J/E
Our Price: $59.00
Gas Fill Vent Combo Chrm
Our Price: $59.19
Fuel Line Assembly (Silverado 4000 Premium)(Sierra)
O.E.M. - Universal
- 8" Length fuel line assembly
- 5/16" Fuel Line Assembly
Fuel Line Assembly (Silverado 4000 Premium)(Sierra)
O.E.M. - OMC
OE# 398549
- 3/8" High Flow Fuel Line Assembly
- 2 - 18-8092 (Fuel Connector), 1 - 18-8005EP-1 (Primer Bulb)
- 8" Length complete fuel line assembly
- Fits: All V8, 1984 & later V6, 1985 & later 120HP, 140HP outboards, 2HP (1 cyl.) - 75HP (3 cyl.) (1976-02)
Combination Gas Fill & Tank Vent w/Straight NeckStraight neck. Chrome plated bronze cap. Black plastic body. Stainless steel beaded chain. Integral tank vent with flame arrestor and anti-surge valve. Deck plate key included.

Fuel Line Assy Universal 3/8Hose Fuel Line Assy Yamaha Fuel Line Assy Mercury
Fuel Line Assy Yamaha
Our Price: $61.69
Fuel Line Assy Mercury
Our Price: $62.49
Fuel Line Assembly (Silverado 4000 Premium) (Sierra)
O.E.M. - Universal
- 8" Length fuel line assembly
- 3/8" Fuel Line Assembly
Fuel Line Assembly (Silverdao 4000 Premium) (Sierra)
O.E.M. - Yamaha
OE#: 6YL-24306-60-00
- 3/8" Fuel Line Assembly
- 8" length Complete Fuel Line Assbemly
- 2 - 18-8076 (Fuel Connectors), 1 - 18-8005EP-1 (Primer Bulb)

- Fits: F75-F250 and 115-300 HP

Fuel Line Assembly (Silverdao 4000 Premium) (Sierra)
O.E.M. - Mercury Marine
OE# 32-858109Q12, 32-858109K12
- 2 - 18-8091 (Fuel Connectors), 1 - 18-8005EP-1 (Primer Bulb)
- 3/8" Fuel Line Assembly
- Primer bulb is included in the 8' assembly
- Has double sealed quick connect type fittings on tank end and clip-on type quick connect on engine end
- Fits: Force 40 HP and larger (1993 & Newer), Force 9.9/15/25HP (1998) and all Mercury Mariner outboards using clip-on type disconnects at both tank and engine ends

Bleeder Hose (50ft) .090 X .220 Fuel Line Hose 3/16in (50ft) Fuel Line
Fuel Line
Our Price: $143.50
Bleeder Hose (Sierra)
O.E.M. - OMC
- I.D.: 0.090"
- O.D.: 0.220"
- Similar to Mercury 32-99130122, 32-892024122
- Made from an alcohol resistant compound

Fuel Line Hose (Sierra)
O.E.M. - OMC
- Replaces: J-E 122838
- Length: 50'
- I.D.: 3/16"
- Non-Pressurized Systems
Fuel Line (Sierra)
- Universal
- Vinyl
- 35 psi working pressure
- Not intended for diesel fuel
- Length: 50' Roll
- 1/8" I.D. x 1/4" O.D.
5/16in B1-15 Fuel Line 100ft Fuel Line Fuel Line
Fuel Line
Our Price: $203.50
Fuel Line
Our Price: $214.00
B1-15 O/B Fuel Line (Trident Marine)
(USCG, SAE, NMMA, ABYC, CE, EPA, CARB)
- I.D.: 5/16"
- Length: 100'
- Light Gray
- For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel
- Meets newest ABYC H-24, SAE J1527, USCG, ISO 8469, CARB and EPA standards; and NMMA Type Accepted, CE Certified and EPA Certified
- Built with 2 spiral reinforcement, New Ultra Low Perm Barrier Liner, and Light Gray CPE Cover
- Formulated for Max resistance to fuels, heat, cold, ozone, abrasion, aging and permeation
- New EPA Certificate of Conformity and CARB Executive Order
Fuel Line (Sierra)
- Universal
- Vinyl
- 35 psi working pressure
- Not intended for diesel fuel
- Length: 50' Roll
- 3/16" I.D. x 5/16" O.D.
Fuel Line (Sierra)
- Universal
- Vinyl
- 35 psi working pressure
- Not intended for diesel fuel
- Length: 50' Roll
- 1/4" I.D. x 3/8" O.D.
3/8in B1-15 Fuel Line 100ft 1/4 B1-15 Fuel Line 100ft 1-1/2 inch A2 Fuel Hose 50 ft
1/4 B1-15 Fuel Line 100ft
Our Price: $235.00
B1-15 O/B Fuel Line (Trident Marine)
(USCG, SAE, NMMA, ABYC, CE, EPA, CARB)
- I.D.: 3/8"
- Length: 100'
- Light Gray
- For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel
- Meets newest ABYC H-24, SAE J1527, USCG, ISO 8469, CARB and EPA standards: and NMMA Type Accepted, CE Certified and EPA Certified
- Built with 2 spiral reinforcement, New Ultra Perm Barrier Liner, and Light Gray CPE Cover
- Formulated for Max resistance to fuels, heat, cold, ozone, abrasion, aging and permeation
- New EPA Certificate of Conformity and CARB Executive Order

B1-15 O/B Fuel Line (Trident Marine)
( USCG, SAE, NMMA, ABYC, CE, EPA, CARB)
- I.D.: 1/4"
- Length: 100'
- Light Gray
- For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel
- Meets newest ABYC H-24, SAE J1527, USCG, ISO 8469, CARB and EPA standards: and NMMA Type Accepted, CE Certified and EPA Certified
- Built with 2 spiral reinforcement, New Ultra Low Perm Barrier Liner, and Light Gray CPE Cover
- Formulated for max resistance to fuels, heat, cold, ozone, abrasion, aging, permeation
- New EPA Certified of Conformity and CARB Executive Order
A2 Fuel Line & Fill (Trident Marine)
(USCG, ISO, SAE, NMMA, Lloyd's, CE)
- I.D.: 1-1/2"
- Length: 50'
- Black w/red stripe
- Fill and Vent plus Diesel Distribution
- Meets newest ABYC H-24 and H-33, SAE J1527, SAE J30R6, ISO 7840 A2, USCG Type A2; and is NMMA Type Accepted, CE Certified and Lloyd's Approved, for all marine fuels including gasoline, alcohol blends, diesel and bio-diesel
- Built with thick wall, smooth cover and wire helix between 2 ply reinforcement for extra service life and bend-ability
- Formulated for Max resistance to fuels, fire, heat, cold, ozone, aging and permeation
1/4in Type A1 Fuel Line 250ft 5/16 in Type A1 Fuel hose 250ft 3/8 inch  A Fuel Line 250 ft
A1-15 Fuel Line (Trident Marine)
(USCG, ISO, SAE, NMMA, ABYC, CE, EPA, CARB)
- I.D.: 1/4"
- Length: 250'
- Black
- Distribution, Return, Vent and Tansfer
- For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel
- Meets newest ABYC H-24 and H-33, SAE J1527, CARB and EPA "A1-15" and USCG Type A1, ISO 7840 A1 standards and requirements, and is NMMA type Accepted and CE Certified
- Built with 2 spiral reinforcement and unique "Perm Barrier Liner" on inside surface of tube
- Formulated for Max resistance to fuels, heat, cold, ozone, aging and permeation
- New EPA Certified and CARB Compliant
A1-15 Fuel Line (Trident Marine)
( USCG, ISO, SAE, NMMA, ABYC, CE, EPA, CARB)
- I.D.: 5/16"
- Length: 250'
- Black
- Distribution, return, vent and transfer
- For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel
- Meets newest ABYC H-24 and H-33, SAE J1527, CARB and EPA "A1-15" and USCG Type A1, ISO 7840 A1 standards and requirements, and is NMMA type Accepted and CE Certified
- Built with 2 spiral reinforcements and unique "Perm Barrier Liner" on inside surface of tube
- Formulated for Max resistance to fuels, fire, heat, cold, ozone, aging and permeation
- New EPA Certified and CARB Compliant
A1-15 Fuel Line (Trident Marine)
(USCG, ISO, SAE, NMMA, ABYC, CE, EPA, CARB)
- I.D.: 3/8"
- Length: 250'
- Black
- Distribution, return, vent and tansfer
- For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel
- Meets newest ABYC H-24 and H-33, SAE J1527, CARB and EPA "A1-15" and USCG Type A1, ISO 7840 A1 standards and requirements, and is NMMA type Accepted and CE Certified
- Built with 2 spiral reinforcement and unique "Perm Barrier Liner" on inside surface of tube
- Formulated for Max resistance to fuels, fire, heat, cold, ozone, aging and permeation
- New EPA Certified and CARB Compliant

5/8 inch Type A Fuel Line 250 ft
A1-15 Fuel Line (Trident Marine)
( USCG, ISO, SAE, NMMA, ABYC, CE, EPA, CARB)
- I.D.: 5/8"
- Length: 250'
- Black
- Distribution, return, vent and transfer
- For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel
- Meets newest ABYC H-24 and H-33, SAE J1527, CARB and EPA "A1-15" and USCG Type A1, ISO 7840 A1 standards and requirements, and is NMMA type Accepted and CE Certified
- Built with 2 spiral reinforcements and unique "Perm Barrier Liner" on inside surface of tube
- Formulated for Max resistance to fuels, heat, fire, cold, ozone, aging and permeation
- New EPA Certified and CARB Compliant
   
 
1