|
|
|
|
|
|
|
|
|
|
|
Heavy Duty Cleat (Marpac) - Black - Injection Molded Nylon - A: 4-1/4" - B: 1" - C: 1-1/4" - D: 1-3/4" - Fastener: #10 FH
|
Open Base Cleat (SeaDog) - Black - Injection molded nylon - Designed with molded-in recess in the base - Traps the sealant in place providing a more watertight seal - A: 4" - B: 7/8" - C: 1-1/8" - D: 2" - Fastener: #8 FH
|
Open Base Cleat (SeaDog) - Flat Head - Hot Dipped Galvanized Iron - A: 4" - B: 1-1/8" - C: 7/8" - D: 1-7/8" - Fastener: #10FH
|
|
|
|
|
|
|
|
|
|
|
|
|
Cleat (SeaSense) - 8" - Black nylon - Durable, high impact, open base cleat - UV resistant - Perfect for docks
|
Skene Chock (SeaDog) - Injection Molded Nylon - A: 4-1/2" - B: 7/16" - C: 1/2" - D: 3-5/8" - Fastener: #10 FH
|
Cleat (SeaSense) - 10" - Black nylon - Durable, high impact, open base cleat - UV resistant - Perfect for docks
|
|
|
|
|
|
|
|
|
|
|
|
|
Cleat (SeaDog) - Nylon - For ropes to 5/32" - Midi CL209 - Ideal for most applications where high loads or rope surges are not likely to be encountered. - Corrosion resistant. - Rope - 5/32"-5/16" - A: 2-7/8" - B: 2-1/8" - C: 3/4" - Fastener: #10
|
Heavy Duty Cleat (SeaDog) - Black - Injection Molded Nylon - A: 6-1/16" - B: 1-1/4" - C: 1-9/16" - D: 2-1/4" - Fastener: 1/4" FH
|
Tie Down Eye Strap (SeaDog) - Forged Bronze Wire Chrome Plated - Can be used for multiple of hold down applications - Used commonly to hold down batteries, fuel tanks, ice chests, life rafts, dinghies, etc. - A: 3/8" - B: 1-1/16" - C: 2-3/16" - Fastener: #10 FH
|
|
|
|
|
|
|
|
|
|
|
|
|
Tie Down Eye Strap (SeaDog) - Forged 304 Stainless Steel - A: 3/8" - B: 1-1/16" - C: 2-1/8" - D: 1/4" - Fastener: #10 FH
|
Zig Zag Cleat (SeaDog) - Injection Molded Nylon - Weave rope around cleat arms, no knots needed. - Great for fender lines, trailer covers and utility lines. - Fits line up to 3/8" - A: 3-1/2" - B: 15/16" - C: 1-15/16" - D: 1-3/4" - Fastener: 1/4" FH
|
Open Base Cleat (SeaDog) - Flat Head - Hot Dipped Galvanized Iron - A: 8" - B: 2-1/8" - C: 1-11/16" - D: 3-1/4" - Fastener: 5/16" FH
|
|
|
|
|
|
|
|
|
|
|
|
|
Bow Eye (SeaDog) - Die Cast Zinc Chrome Plated Head - Galvanized Shaft - A: 3/8" NC - B: 2-9/16" - C: 15/16" - D: 4-3/4" - E: 1-13/16" - B.S.: 2,500 lbs.
|
Open Base Cleat (SeaDog) - Flat Head - Hot Dipped Galvanized Iron. - A: 6" - B: 1-3/8" - C: 1-1/4" - D: 2-3/16" - Fastener: 1/4" FH
|
Oblong Eye Plate (SeaDog) - Investment Cast 316 - A: 3" - B: 1/2" - C: 5/8" - D: 2-1/16" - E: 7/8" - Fastener: 1/4" FH
|
|
|
|
|
|
|
|
|
|
|
|
|
Cleat (SeaDog) - Nylon - For ropes to 1/2" - Vertical CL201 - Ideal for most applications where high loads or rope surges are not likely to be encountered. - Corrosion resistant. - Rope: 1/4"-1/2" - A: 3-3/4" - B: 2-13/16" - C: 1-1/8" - Fastener: 1/4"
|
Open Base Cleat (SeaDog) - Flat Head - Hot Dipped Galvanized Iron. - A: 10" - B: 2-1/2" - C: 2-3/8" - D: 4-1/16" - Fastener: 3/8" FH
|
Skene Chock (SeaDog) - Die Cast Zinc Chrome Plated - A: 3-3/8" - B: 3/4" - C: 5/8" - D: 2-1/2" - Fastener: #10 FH
|
|
|
|
|
|
|
|
|
|
|
|
|
Cleat (Marpac) - Polished stainless steel - Fastens with 1/4" screws - Length: 6"
|
Open Base Cleat (SeaDog) - Flat Head - Hot Dipped Galvanized Iron - A: 12" - B: 2-7/8" - C: 3-1/4" - D: 5-5/16" - Fastener: 3/8" FH
|
Oblong Eye Plate (SeaDog) - Investment Cast 316 Stainless Steel - A: 4" - B: 3/4" - C: 7/8" - D: 2-15/16" - E: 1-3/8" - Fastener: 5/16" FH
|
|
|
|
|
|
|
|
|
|
|
|
|
Cleat (SeaSense) - 6" - 316 Stainless steel - Heavy-duty solid stainless cast cleat will stay looking good through the harshest marine environment
|
Cleat (SeaSense) - 12" - Cast iron galvanized - Used for dock cleat
|
Recessed Anchor Point (SeaDog) - Investment Cast 316 Stainless Steel - A: 4" - B: 1/8" - C: 3/4" - D: 3" - E: 1-1/2" - F: 2" - Fastener: #10 FH
|
|
|
|
|
|
|
|
|
|
|
|
|
Cleat (SeaSense) - 8" - 316 stainless steel - Heavy-duty solid stainless cast cleat will stay looking good through the harshest marine environment
|
Hollow Base Cleat (Marpac) - Yacht Design - Length: 8" - Polished stainless steel. - Fastens with 1/4" screws.
|
Lifting Ring Cleat (SeaDog) - Investment Cast 316 Stainless Steel - A: 6" - B: 1-1/16" - C: 5/8" - D: 1" - Max. Vertical Load: 4,000 lbs. - Fastener: #10 FH - * Right hand threads
|
|
|
|
|
|
|
|
|
|
|
|
|
Open Base Cleat (SeaDog) - Cast 316 Stainless Steel - A: 10" - B: 1-7/8" - C: 3-5/8" - D: 1-7/8" - Fastener: 5/16" FH
|
S-Style Pull-Up Cleat w/Stud (SeaDog) - Investment Cast 316 Stainless Steel - Recess flush to the deck for a contemporary look. - Backing plate sold separately - Pull-Up cleats accept drain hoses for water drainage to bilge. - A: 8-3/4" - B: 6-1/4" - C: 2-1/8" - D: 5/8" - E: 3-3/4" - F: 2-3/4" - G: 7-1/4"
|
S-Style Pull-Up Cleat w/Stud (SeaDog) - Investment Cast 316 Stainless Steel. - Recess flush to the deck for contemporary look. - Accepts drain hoses for water drainage to bilge. - Includes backing plate - A: 6-1/4" - B: 4-1/2" - C: 1-1/2" - D: 5/8" - E: 2-11/16" - F: 1-9/16" - G: 5"
|
|