Gas Lift Rod End Fitting
Gas Lift Rod End Fitting (SeaDog)
- Injection Molded Nylon
- Accepts 10mm Ball
- Direct replacement for all Sea-Dog Line Gas Lift Springs
- Thread: 6mm-1
- A: 1-1/8"
- B: 5/8"
Gas Lift Ball Stud - 10mm
Gas Lift Ball Stud (SeaDog)
- 304 Stainless Steel
- Sold as Each
- A (Ball): 10mm
- B: 5/8"
- C: 9/16"
- Threads: 5/16"-18
- Hex Nut: 1/2"
Flush Gas Lift Mount
Flush Gas Lift Mount (SeaDog)
- 304 Stainless Steel
- Sold as Each
- 10mm Ball
- Fastener: # 19 Round Head
- A: 2-1/4"
- B: 1/2"
- C: 1-1/2"
- D: 1"
- E: 1-1/2"
90 Degree Gas Lift Mount
90 Degree Gas Lift Mount (SeaDog)
- 304 Stainless Steel
- 10mm Ball
- Sold as Each Only
- Two Mounting Holes
- Fastener: # 10 Round Head
- A: 2"
- B: 5/8"
- C: 1-1/8"
- D: 3/4"
- E: 1-1/2"
90 Degree Gas Lift Mount
90 Degree Gas Lift Mount (SeaDog)
- 304 Stainless Steel
- 10mm Ball
- Sold as Each Only
- With Three Mounting Holes
- Fastener: # 10 Round Head
- A: 2"
- B: 1-1/4"
- C: 1-1/2"
- D: 1"
- E: 1-/2"
SS Hatch Spring
Hatch Spring (SeaDog)
- Formed 304 Stainless Steel
- Sold as Each
- Fastener: #6 Round Head or 1/8" Pop Rivet
- Has an internal wire that prevents the spring from being overextended during normal use
- A: 9"
- B: 1-1/16"
- C: 1-1/16"
Hatch Spring - Small
Hatch Spring - Small (SeaDog)
- Formed 304 Stainless Steel
- Sold as Each
- Fastener: # 10 Round Head & 3/16" Pop Rivet
- The Sea-Dog Hatch Spring has an internal wire that prevents the spring from being overextended during normal use.
- Not recommended for applications where hatch will scoop wind while boat is underway and overextend spring.
- A: 8-5/8"
- B: 1-1/16"
- C: 3/4"
Gas Filled Lift Spring
Gas Filled Lift Spring (SeaDog)
- Chrome and Powder Coated Steel, Bronze, Polymers and Nitrogen Gas
- Lift Weight: 20 Lbs.
- Sold as Each Only
- A: 10"
- B: 7"
- C: 3"
- D: 15mm
- E: 6mm
- Sea-Dog Line gas springs and hardware are manufactured to Marine OE standards and have been installed in Marine and RV applications for years. You can count on high quality and two year warranty on all Sea-Dog Line Gas Springs. Part of the high quality is the unique Multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings and polymer end fittings.
Gas Filled Lift Spring
Gas Filled Lift Spring (SeaDog)
- Chrome and Powder Coated Steel, Bronze, Polymers and Nitrogen Gas
- Lift Weight: 40 Lbs.
- Sold as Each Only
- A: 10"
- B: 7"
- C: 3"
- D: 15mm
- E: 6mm
- Sea-Dog Line gas springs and hardware are manufactured to Marine OE standards and have been installed in Marine and RV applications for years. You can count on high quality and two year warranty on all Sea-Dog Line Gas Springs. Part of the high quality is the unique Multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings and polymer end fittings.
Gas Filled Lift Spring
Gas Filled Lift Spring (SeaDog)
- Chrome and Powder Coated Steel, Bronze, Polymers and Nitrogen Gas
- Lift Weight: 20 Lbs.
- Sold as Each Only
- A: 15"
- B: 9-1/2"
- C: 5-1/2"
- D: 15mm
- E: 6mm
- Sea-Dog Line gas springs and hardware are manufactured to Marine OE standards and have been installed in Marine and RV applications for years. You can count on high quality and two year warranty on all Sea-Dog Line Gas Springs. Part of the high quality is the unique Multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings and polymer end fittings.
Gas Filled Lift Spring
Gas Filled Lift Spring (SeaDog)
- Chrome and Powder Coated Steel, Bronze, Polymers and Nitrogen Gas
- Lift Weight: 40 Lbs.
- Sold as Each Only
- A: 15"
- B: 9-1/2"
- C: 5-1/2"
- D: 15mm
- E: 6mm
- Sea-Dog Line gas springs and hardware are manufactured to Marine OE standards and have been installed in Marine and RV applications for years. You can count on high quality and two year warranty on all Sea-Dog Line Gas Springs. Part of the high quality is the unique Multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings and polymer end fittings.
Gas Filled Lift Spring
Gas Filled Lift Spring (SeaDog)
- Chrome and Powder Coated Steel, Bronze, Polymers and Nitrogen Gas
- Lift Weight: 60 Lbs.
- Sold as Each Only
- A: 15"
- B: 9-1/2"
- C: 5-1/2"
- D: 15mm
- E: 6mm
- Sea-Dog Line gas springs and hardware are manufactured to Marine OE standards and have been installed in Marine and RV applications for years. You can count on high quality and two year warranty on all Sea-Dog Line Gas Springs. Part of the high quality is the unique Multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings and polymer end fittings.
Gas Filled Spring Lift 30# 17
Gas Filled Lift Spring (SeaDog)
- Chrome and Powder Coated Steel, Bronze, Polymers and Nitrogen Gas
- Lift Weight: 30 Lbs.
- Sold as Each Only
- A: 17"
- B: 11"
- C: 6-3/4"
- D: 15mm
- E: 6mm
- Sea-Dog Line gas springs and hardware are manufactured to Marine OE standards and have been installed in Marine and RV applications for years. You can count on high quality and two year warranty on all Sea-Dog Line Gas Springs. Part of the high quality is the unique Multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings and polymer end fittings.
Gas Filled Lift Spring
Gas Filled Lift Spring (SeaDog)
- Chrome and Powder Coated Steel, Bronze, Polymers and Nitrogen Gas
- Lift Weight: 20 Lbs.
- Sold as Each Only
- A: 20"
- B: 12"
- C: 8-1/8"
- D: 15mm
- E: 6mm
- Sea-Dog Line gas springs and hardware are manufactured to Marine OE standards and have been installed in Marine and RV applications for years. You can count on high quality and two year warranty on all Sea-Dog Line Gas Springs. Part of the high quality is the unique Multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings and polymer end fittings.
Gas Filled Lift Spring
Gas Filled Lift Spring (SeaDog)
- Chrome and Powder Coated Steel, Bronze, Polymers and Nitrogen Gas
- Lift Weight: 30 Lbs.
- Sold as Each Only
- A: 20"
- B: 12"
- C: 8-1/8"
- D: 15mm
- E: 6mm
- Sea-Dog Line gas springs and hardware are manufactured to Marine OE standards and have been installed in Marine and RV applications for years. You can count on high quality and two year warranty on all Sea-Dog Line Gas Springs. Part of the high quality is the unique Multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings and polymer end fittings.
Gas Filled Lift Spring
Gas Filled Lift Spring (SeaDog)
- Chrome and Powder Coated Steel, Bronze, Polymers and Nitrogen Gas
- Lift Weight: 40 Lbs.
- Sold as Each Only
- A: 20"
- B: 12"
- C: 8-1/8"
- D: 15mm
- E: 6mm
- Sea-Dog Line gas springs and hardware are manufactured to Marine OE standards and have been installed in Marine and RV applications for years. You can count on high quality and two year warranty on all Sea-Dog Line Gas Springs. Part of the high quality is the unique Multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings and polymer end fittings.
Gas Filled Lift Spring
Gas Filled Lift Spring (SeaDog)
- Chrome and Powder Coated Steel, Bronze, Polymers and Nitrogen Gas
- Lift Weight: 60 Lbs.
- Sold as Each Only
- A: 20"
- B: 12"
- C: 8-1/8"
- D: 15mm
- E: 6mm
- Sea-Dog Line gas springs and hardware are manufactured to Marine OE standards and have been installed in Marine and RV applications for years. You can count on high quality and two year warranty on all Sea-Dog Line Gas Springs. Part of the high quality is the unique Multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings and polymer end fittings.
Gas Filled Lift Spring
Gas Filled Lift Spring (SeaDog)
- Chrome and Powder Coated Steel, Bronze, Polymers and Nitrogen Gas
- Lift Weight: 40 Lbs.
- Sold as Each Only
- A: 7-1/2"
- B: 5-1/2"
- C: 2"
- D: 15mm
- E: 6mm
- Sea-Dog Line gas springs and hardware are manufactured to Marine OE standards and have been installed in Marine and RV applications for years. You can count on high quality and two year warranty on all Sea-Dog Line Gas Springs. Part of the high quality is the unique Multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings and polymer end fittings.
Gas Filled Lift Spring
Gas Filled Lift Spring (SeaDog)
- Chrome and Powder Coated Steel, Bronze, Polymers and Nitrogen Gas
- Lift Weight: 80 Lbs.
- Sold as Each Only
- A: 20"
- B: 12"
- C: 8-1/8"
- D: 15mm
- E: 6mm
- Sea-Dog Line gas springs and hardware are manufactured to Marine OE standards and have been installed in Marine and RV applications for years. You can count on high quality and two year warranty on all Sea-Dog Line Gas Springs. Part of the high quality is the unique Multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings and polymer end fittings.
Gas Filled Lift Spring
Gas Filled Lift Spring (SeaDog)
- Chrome and Powder Coated Steel, Bronze, Polymers and Nitrogen Gas
- Lift Weight: 90 Lbs.
- Sold as Each Only
- A: 20"
- B: 12"
- C: 8-1/8"
- D: 19mm
- E: 8mm
- Sea-Dog Line gas springs and hardware are manufactured to Marine OE standards and have been installed in Marine and RV applications for years. You can count on high quality and two year warranty on all Sea-Dog Line Gas Springs. Part of the high quality is the unique Multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings and polymer end fittings.
Gas Filled Lift Spring
Gas Filled Lift Spring (SeaDog)
- Chrome and Powder Coated Steel, Bronze, Polymers and Nitrogen Gas
- Lift Weight: 120 Lbs.
- Sold as Each Only
- A: 20"
- B: 12"
- C: 8"
- D: 19mm
- E: 8mm
- Sea-Dog Line gas springs and hardware are manufactured to Marine OE standards and have been installed in Marine and RV applications for years. You can count on high quality and two year warranty on all Sea-Dog Line Gas Springs. Part of the high quality is the unique Multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings and polymer end fittings.
SS Hatch Spring
Hatch Spring (SeaDog)
- Formed 304 Stainless Steel
- Sold as Each
- Fastener: # 10 Round Head
- Has an internal wire that prevents the spring from being overextended during normal use
- Not recommended where hatch will scoop wind while boat is underway and overextend spring
- Ideal for use on lighter hatches, dock boxes and lazarettes
A: 10-1/8"
B: 1-3/8"
C: 1-5/8"
D: 9/16"
Hatch Adjuster
Hatch Adjuster (SeaDog)
- Formed 304 Stainless/Nylon
- Sold as Each
- A: 11-1/8"
- B: 17-7/8"
- C: 1-3/8"
- D: 1-3/16"
Hatch Adjuster
Hatch Adjuster (SeaDog)
- Formed 304 Stainless/Nylon
- Sold as Each
- A: 14-3/16"
- B: 24-3/16"
- C: 1-3/8"
- D: 1-3/16"
Gas Spring SS, 5.5 to 7.5in 20lb
Marine Grade Gas Lift Support (Sierra)
- O.E. # GSSX-4900-20
- Ext. Length: 7.5"
- Compressed Length: 5.5"
- Rated: 20 lbs.
- Designed for demanding saltwater applications.
- 316L Stainless Steel Rod and Cylinder.
- Engineered polymer rod ends.
- Bronze bushings.
- Multi-lobe internal seal.
Gas Spring SS, 7 to 10in 20lb
Marine Grade Gas Lift Support (Sierra)
- O.E. # GSSX-5000-20
- Ext. Length: 10"
- Compressed Length: 7"
- Rated: 20 lbs.
- Designed for demanding saltwater applications.
- 316L Stainless Steel Rod and Cylinder.
- Engineered polymer rod ends.
- Bronze bushings.
- Multi-lobe internal seal.
Gas Springs SS, 8.5 to12in 30lb
Marine Grade Gas Lift Support (Sierra)
- O.E. # - GSSX-5100-30
- Ext. Length: 12"
- Compressed Length: 8.5"
- Rated: 30 lbs.
- Designed for demanding saltwater applications.
- 316L Stainless Steel Rod and Cylinder.
- Engineered polymer rod ends.
- Bronze bushings.
- Multi-lobe internal seal.
Gas Spring SS, 9.5 to 15in 20lb
Marine Grade Gas Lift Support (Sierra)
- O.E.# - GSSX-5150-20
- Ext. Length: 15"
- Compressed Length: 9.5"
- Rated: 20 lbs.
- Designed for demanding saltwater applications.
- 316L Stainless Steel Rod and Cylinder.
- Engineered polymer rod ends.
- Bronze bushings.
- Multi-lobe internal seal.
Gas Spring SS, 11 to 17 20lb
Marine Grade Gas Lift Support (Sierra)
- O.E.# - GSSX-5200-20
- Ext. Length: 17"
- Compressed Length: 11"
- Rated: 20 lbs.
- Designed for demanding saltwater applications.
- 316L Stainless Steel Rod and Cylinder.
- Engineered polymer rod ends.
- Bronze bushings.
- Multi-lobe internal seals.