|
|
|
|
|
|
|
|
|
|
|
Clamp Block Tube (UFLEX) - 53930 J Aluminum steel tube ONLY for clamp block S39
|
Mounting Bezel (UFLEX) - Black - 90 Degree mounting bezel - For Use with T71FC, T73NRFC, T91, T93ZT, helms, as well as with the Rack steering system.
|
Mounting Bezel (UFLEX) - Black - 20 Degree mounting bezel - For Use with T71FC, T73NRFC, T91, T93ZT, helms, as well as with the Rack steering system.
|
|
|
|
|
|
|
|
|
|
|
|
|
Clevis (UFLEX) - 34459X
|
Standard Rack Helm (UFLEX) - Features and Technical Specifications
- Easy and safe Steering - All stainless steel cable output ends - Made exclusively in corrosion resistant materials - Optional 90 degree or 20 degree installation - Standard 3/4" tapered shaft - Lock-to-lock steering wheel turns: 3.5 l Stroke: 8.2" (210 mm) - Maximum allowable steering wheel diameter: 16.5" (420 mm) - Minimum steering cable end radius: 7.9" (200 mm) - Not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat - Available in pack includes X34 bezel and M66 cable with RACKTECH and ACCUTECH - Exceeds EN 28848 safety standards - Exceeds ABYC P17 safety standards
|
Single Cable Steering Helm
Rotary Steering System (UFLEX) -
Features and Technical Specifications:
- Fast connect, simple installation - All stainless steel cable output ends - Corrosion resistant materials - Particularly suitable where clearance is limited -
Optional 90 Degree or 20 Degree installation - Standard 3/4" tapered shaft - Lock-to-lock steering wheel turns: approx. 3.8 - Stroke 9" (228 mm) - Maximum allowable steering wheel diameter: 16" (406 mm) - Minimum steering cable bend radius: 7.9" (200 mm) - Minimal feedback - Compact for mounting - T71FC and T72FC steering systems are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat - For boats faster than 50 mph our hydraulic steering systems are recommended - T71FC steering system is also available in a package with ROTECH, which includes the X35 bezel and M66 cable - Exceeds EN 28848 safety standards - Exceeds ABYC P17 safety standards
|
|
|
|
|
|
|
|
|
|
|
|
|
Standard Rack Tilt Helm (UFLEX) - Features and Technical Specifications:
- Easy and safe steering - Fast, simple installation - Tilt range of 48 degrees and five locking positions - Tilt device eliminates underdash movement - Standard 3/4" tapered shaft - stainless steel - All stainless steel cable output ends - Made exclusively in corrosion resistant materials - Lock-to-lock steering wheel turns 3.5 - Stroke: 8.2" (210 mm) - Maximum allowable steering wheel diameter: 16.5" (420 mm) - Minimum steering cable bend radius: 7.9" (200 mm) - Not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat - Exceeds EN 28848 safety standards - Exceeds ABYC P17 safety standards
|
Splashwell Mounting (UFLEX) - 31917 G - Corrosion resistant flange
|
Steering Cable Support (UFLEX) - 31971 M Stringer mount clamp block - Constructed of marine aluminum and stainless steel.
|
|
|
|
|
|
|
|
|
|
|
|
|
Anti-Feedback Tilt Steering System (UFLEX) - Tilt single cable steering helm - Featuring Planetary Gear Design - Features and Technical Specifications:
- Tilt range of 48 Degree and five locking positions - Fast connect, simple installation - Tilt device eliminates under dash movement - Standard 3/4" tapered shaft - stainless steel - All stainless steel cable output ends - Corrosion resistant materials - Lock-to-lock steering wheel turns: approx. 3.8 - Stroke: 9" (228 mm) - Maximum allowable steering wheel diameter: 16" (406 mm) - Minimum steering cable bend radius: 7.9" (200 mm) - T81FC, T82FC and T83NRFC steering systems are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat - For boats faster than 50 mph our hydraulic steering systems are recommended - Exceeds En 28848 safety standards - Exceeds ABYC P17 safety standards
|
Anti-feedback Helm Assembly (UFLEX) - Features and Technical Specifications
- Easy and safe steering: patented anti-feedback G99NR helm eliminates the continuous load on the operator caused by the propeller torque - All stainless steel cable output ends - Made exclusively in corrosion resistant materials - Optional 90 degree or 20 degree installation - Standard 3/4" tapered shaft - Lock-to-lock steering wheel turns: 3.5 l Stroke: 8.2" (210mm) - Maximum allowable steering wheel diameter: 16.5" (420 mm) - Minimum steering cable bend radius: 7.9" (200 mm) - Not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat - Available in package includes X34 bezel and M66 cable with RACKTECH and ACCUTECH - Exceeds EN 28848 safety standards - Exceeds ABYC P17 safety standards - Non reversible (see UFLEX catalog on bottom of main page for more information)
|
Dual Cable Steering Helm
Rotary Steering System (UFLEX) -
Features and Technical Specifications:
- Fast connect, simple installation - All stainless steel cable output ends - Corrosion resistant materials - Particularly suitable where clearance is limited - Optional 90 Degree or 20 Degree installation - Standard 3/4" tapered shaft
Lock-to-lock steering wheel turns: approx. 3.8 - Stroke: 9"(228 mm) - Maximum allowable steering wheel diameter: 16" (406 mm) - Minimum steering cable bend radius: 7.9" (200 mm) - Minimal feedback - Compact for mounting - T71FC and T72FC steering systems are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat - For boats faster than 50 mph our hydraulic steering systems are recommended - Exceeds EN 28848 safety standards - Exceeds ABYC P17 safety standards
|
|
|
|
|
|
|
|
|
|
|
|
|
Anti-Feedback Steering System (UFLEX) - Featuring Planetary Gear Design - Non-Reversible Single Steering Helm
- Single Cable Steering Helm - Features and Technical Specifications:
- Easy and safe steering : a patented non-reversible mechanism eliminates the continuous load on the operator caused by the propeller torque. - Fast connect, simple installation - Compact rotary helm unit: the central location of the steering shaft makes these systems the most compact in their class. - Most suitable where clearance is limited. - Ideal for larger outboards and surfacing propellers. - Optional 90 Degree or 20 Degree installation - Standard 3/4" tapered shaft. - All stainless steel cable output ends. - Made exclusively in corrosion resistant materials. - Lock-to-lock steering wheel turns: approx 3.8 - Stroke: 9"(228 mm) - Maximum allowable steering wheel diameter: 16" - Minimum steering cable bend radius:7.9" - T73NRFC and T74NRFC steering systems are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat. - For boats faster than 50 mph the twin cable steering system T74NRFC is recommended - Available in package including the X34 bezel and M66 cable with ACCURA - Exceeds EN 28848 safety standards - Exceeds ABYC P17 safety standards
|
Front Mount Outboard Cylinder (UFLEX) - For outboard engines up to 150 hp - UC94-OBF/1 is not suitable for Honda BF115 and BF130 engines and Mercury Optimax 75, 90, 115 making the UC94-OBF/3 cylinder a secondary option - Intended for single engine applications of 150hp and under, the UC94 cylinder is compatible with competing helms, hoses and oil, and is built to last with heavy-duty stainless steel cylinder rod, seals and link assemblies. - Constructed of top grade materials this cylinder is simple to install and fits almost every 2- and 4-stroke outboard engine in the market. - Split and pinned mounting rod for easy installation, and bushings to prevent friction with engine tilt tube. - Recommended for use with the UP20 series helm and premade hose kits (Kit OB and OB-BHBR). - Specifications: - Volume: 5.7 cu. in. (94cc) - Output Force: 613 lbs. - Stroke: 7.3" (186mm) - Hose: 3/8" high-pressure flex hose
|
Front Mount Outboard Cylinder (UFLEX) - For outboard engines up to 150 hp - Not suitable for Honda BF115 and BF130 engines and Mercury Optimax 75, 90, 115. For these engines UC94-OBF/3 is available - Intended for single engine applications of 150hp and under, the UC94 cylinder is compatible with competing helms, hoses and oil, and is built to last with heavy-duty stainless steel cylinder rod, seals and link assemblies. - Constructed of top grade materials this cylinder is simple to install and fits almost every 2- and 4-stroke outboard engine in the market. - Split and pinned mounting rod for easy installation, and bushings to prevent friction with engine tilt tube. - Recommended for use with the UP20 series helm and premade hose kits (Kit OB and OB-BHBR). - Specifications: - Volume: 5.7 cu. in. (94cc) - Output Force: 613 lbs. - Stroke: 7.3" (186mm) - Hose: 3/8" high-pressure flex hose
|
|