Home > Pumps & Plumbing > Marine Plumbing > Marine Hose & Hose Clamps > Exhaust Hose
Sort By:
1
1/8in Speedometer Pitot Tube 500 1/8in Speedometer Pitot Tube 500

Pitot Tubing (Trident Marine)
- I.D.: 1/8"
- Black
- Temp. Range: -20 degrees F to 212 degrees F
- PVC tubing for connection between speedometer pickup and the gauge
- Braided reinforcement allows for high-speed applications and maximum flexibility

Our Price: $12.00
Blower Vent Ducting Hose Wht 3in Blower Vent Ducting Hose Wht 3in

PVC Vent Duct (Trident Marine)
- I.D.: 3"
- Standard vent ducting 3 ml
- White
- Wire supported vinyl ducting resists weather, sunlight and ozone
- Won't support flame
- Operating temps: 0 degrees to +160 degrees F

Our Price: $60.00
Blower Vent Ducting 4in Wht PVC Blower Vent Ducting 4in Wht PVC

PVC Vent Duct (Trident Marine)
- I.D.: 4"
- Standard vent ducting 3" ml
- White
- Wire supported vinyl ducting resists weather, sunlight and ozone
- Won't support flame
- Operating temps: 0 to +160 degrees F

Our Price: $62.50
1-3/4 in SW Hose 12.5 ft 1-3/4 in SW Hose 12.5 ft

Wet Exhaust & Water Hose (Trident Marine)
( SAE J2006 & Lloyd's)
- I.D.: 1-3/4"
- Length: 12.5'
- Black w/blue stripe
- For short, straight connections
- In small I.D.'s for critical engine coolant & circulation, heat exchanger and discharge uses
- Extra heavy tube and cover with 2 to 6 ply reinforcement resists heat, aging, ozone, exhaust and sani chemicals
- Exceeds SAE J2006-R1 and ABYC & NMMA P-1 exhaust standards
- Lloyd's Registry Type Approved Cert. 02/00029
- Black high-temp EDPM rubber 280 degrees F max
- * Recommend double clamping with stainless steel T-bolt or Constant-Torque clamps

Our Price: $104.66
1 3/4 HW Water Hose 12.5' 1 3/4 HW Water Hose 12.5'

Wet Exhaust & Water Hose (Trident Marine)
(SAE J2006 & Lloyd's)
- I.D.: 1-3/4"
- Length: 12.5'
- Black w/blue stripe
- For longer, bent connections
- In smaller I.D.'s for engine intake, critical water, drain, scupper bilge & sanitation uses
- Extra heavy tube and cover with wire helix between 2 ply reinforcement provides excellent flexibility and bend radius
- Resists heat, ozone, exhaust, sani chemicals, panting and collapse
- Exceeds SAE J2006-R2 and ABYC & NMMA P-1 exhaust standards
- Lloyd's Registry Type Approved Cert. 02/00029
- Black high-temp EDPM rubber 280 degrees F max
- * Recommend double clamping with stainless steel T-bolt or Constant-Torque clamping

Our Price: $107.14
5/8 in SW Water Hose 25ft 5/8 in SW Water Hose 25ft

Wet Exhaust & Water Hose (Trident Marine)
(SAE J2006 & Lloyd's)
- I.D.: 5/8"
- Black w/blue stripe
- For short, straight connections
- Smaller inside diameters for critical engine coolant & circulation, heat exchanger and discharge uses
- Extra heavy tube and cover with 2 to 6 ply reinforcement resists heat, aging, ozone, exhaust and sani chemical
- Exceeds (SAE J2006-R1, and ABYC & NMMA P-1 exhaust standards
- Lloyd's Registry Approved Cert. 02/00029
- Black high-temp EDPM rubber 280 degrees F max
- * Recommend double clamping with stainless steel T-bole or Constant-Torque clamps

Our Price: $107.40
2 in SW Hose 12.5 ft 2 in SW Hose 12.5 ft

Wet Exhaust & Water Hose (Trident Marine)
( SAE J2006 & Lloyd's)
- I.D.: 2"
- Length: 12.5'
- Black w/blue stripe
- For short, straight connections
- In smaller I.D.'s for critical engine coolant & circulation, heat exchanger and discharge uses
- Extra heavy tube and cover with 2 to 6 ply reinforcement resists heat, aging, ozone, exhaust and sani chemicals
- Exceeds SAE J2006-R1 and ABYC & NMMA P-1 exhaust standards
- Lloyd's Registry Type Approved Cert. 02/00029
- Black high-temp EDPM rubber 280 degrees F max
- * Recommend double clamping with stainless steel T-bolt or Constant-Torque clamps

Our Price: $121.18
2 inch HW 12.5 ft 2 inch HW 12.5 ft

Wet Exhaust & Water Hose (Trident Marine)
(SAE J2006 & Lloyd's)
- I.D.: 2"
- Length: 12.5'
- For longer, bent connections
- In smaller I.D.'s for engine intake, critical water, drain scupper bilge & sanitation uses
- Extra heavy tube and cover with wire helix between 2 ply reinforcement provides excellent flexibility and bend radius
- Resists heat, ozone, exhaust, sani chemicals, panting and collapse
- Exceeds SAE J2006-R2 and ABYC & NMMA P-1 exhaust standards
- Lloyd's Registry Type Approved Cert. 02/00029
- Black high-temp EDPM rubber 280 degrees F max
- * Recommend double clamping with stainless steel T-bolt or Constant-Torque clamps

Our Price: $122.00
3/4 in SW Trident Water 25 FT 3/4 in SW Trident Water 25 FT

Wet Exhaust & Water Hose (Trident Marine)
( SAE J2006 & Lloyd's)
- I.D.: 3/4"
- Black w/blue stripe
- For short, straight connections
- Smaller inside diameters for critical engine coolant & circulation, heat exchanger and discharge uses
- Extra heavy tube and cover with 2 to 6 ply reinforcement resists heat, aging, ozone, exhaust and sani chemicals
- Exceeds (SAE J2006-R1, and ABYC & NMMA P-1 exhaust standards
- Lloyd's Registry Type Approved Cert. 02/00029
- Black high-temp EDPM rubber 280 degrees F max
- * Recommend double clamping with stainless steel T-bolt or Constant-Torque clamps

Our Price: $123.94
1/2 in HW Water Hose 25ft 1/2 in HW Water Hose 25ft

Wet Exhaust & Water Hose (Trident Marine)
( SAE J2006 & LLoyd's)
- I.D.: 1/2"
- Black w/blue stripe
- Longer bent connections
- In small inside diameters for engine intake, critical water drain, scupper bilge & sanitation uses
- Extra heaving tube and cover with wire helix between 2 ply reinforcement provides excellent flexibility and bend radius
- Resists heat, ozone, exhaust, sani chemicals, panting and collapse
- Exceeds (SAE j2006-R2, and ABYC & NMMA P-1 exhaust standards
- Lloyd's Registry Type Approved Cert. 02/00029
- Black high-temp EDPM rubber 280 degrees F max
- * Recommend double clamping with stainless steel T-bolt or Constant-Torque clamps

Our Price: $128.88
1 in SW Water Hose 25 FT 1 in SW Water Hose 25 FT

Wet Exhaust & Water Hose (Trident Marine)
( SAE J2006 & Lloyd's)
- I.D.: 1"
- Black w/blue stripe
- For short, straight connections
- Smaller inside diameters for critical engine coolant & circulation, heat exchanger and discharge uses
- Extra heavy tube and cover with 2 to 6 ply reinforcement resists heat, aging, ozone, exhaust and sani chemicals
- Exceeds (SAE J2006-R1, and ABYC 7 NMMA P-1 exhaust standards
- Lloyd's Registry Type Approved Cert. 02/00029
- Black high-temp EDPM rubber 280 degrees F max
- * Recommend double clamping with stainless steel T-bolt or Constant-Torque clamps

Our Price: $154.75
1 inch HW Water Hose 25ft  box 1 inch HW Water Hose 25ft box

Wet Exhaust & Water Hose (Trident Marine)
(SAE J2006 & Lloyd's)
- I.D.: 1"
- Black w/blue stripe
- For longer bent connections
- Smaller inside diameters for engine intake, critical water, drain, scupper bilge & sanitation uses
- Extra heavy tube and cover with wire helix between 2 ply reinforcement provides excellent flexibility and bend radius
- Resists heat, ozone, exhaust, sani chemicals, panting and collapse
- Exceeds (SAE J2006-R2, and ABYC & NMMA P-1 exhaust standards
- Lloyd's Registry Type Approved Cert. 02/00029
- Black high-temp EDPM rubber 280 degrees F max
- * Recommend double clamping with stainless steel T-bolt or Constant-Torque clamps

Our Price: $157.52
3/4 in HW Water Hose 25ft 3/4 in HW Water Hose 25ft

Wet Exhaust & Water Hose (Trident Marine)
( SAE J2006 & Lloyd's)
- I.D.: 3/4"
- Black w/blue stripe
- For longer bent connections
- Smaller inside diameter for engine intake, critical water, drain, scupper bilge & sanitation use
- Extra heavy tube and cover with wire helix between 2 ply reinforcement provides excellent flexibility and bend radius
- Resists heat, ozone, exhaust, sani chemicals, panting and collapse
- Exceeds (SAE J2006-R2, and ABYC & NMMA P-1 exhaust standards)
- Lloyd's Registry Type Approved Cert. 02/00029
- Black high-temp EDPM rubber 280 degrees F max
- * Recommend double clamping with stainless steel T-Bolt or Constant-Torque clamps

Our Price: $161.75
2-1/2 in SW Hose 12.5 ft 2-1/2 in SW Hose 12.5 ft

Wet Exhaust & Water Hose (Trident Marine)
( SAE J2006 & Lloyd's)
- I.D.: 2-1/2"
- Length: 12.5'
- Black w/blue stripe
- For short, straight connections
- In smaller I.D.'s for critical engine coolant & circulation, heat exchanger and discharge uses
- Extra heavy tube and cover with 2 to 6 ply reinforcement resists heat, aging, ozone, exhaust and sani chemicals
- Exceeds SAE J2006-R1 and ABYC & NMMA P-1 exhaust standards
- Lloyd's Registry Type Approved Cert. 02/00029
- Black high-temp EDPM rubber 280 degrees F max
- * Recommend double clamping with stainless steel T-bolt or Constant-Torque clamps

Our Price: $165.52
5/8 inch HW Water Hose (25 ft) 5/8 inch HW Water Hose (25 ft)

Wet Exhaust & Water Hose (Trident Marine)
( SAE J2006 & Lloyd's)
- I.D.: 5/8"
- Black w/blue stripe
- For longer bent connections
- Smaller inside diameter for engine intake, critical water, drain, scupper bilge & sanitation use
- Extra heavy tube and cover with wire helix between 2 ply reinforcement provides excellent flexibility and bend radius
- Resists heat, ozone, exhaust, sani chemicals, panting and collapse
- Exceeds (SAE J2006-R2, and ABYC & NMMA P-1 exhaust standards
- Lloyd's Registry Type Approved Cert. 02/00029
- Black high-temp EDPM rubber 280 degrees F max
- * Recommend double clamping with stainless steel T-bolt or Constant-Torque clamps

Our Price: $170.75
1-1/4 in SW Water Hose 25ft box 1-1/4 in SW Water Hose 25ft box

Wet Exhaust & Water (Trident Marine)
(SAE J2006 & Lloyd's)
- I.D.: 1-1/4"
- Black w/blue stripe
- For short, straight connections
- Small inside diameters for critical engine coolant & circulation, heat exchanger and discharge uses
- Extra heavy tube and cover with 2 to 6 ply reinforcement resists heat, aging, ozone, exhaust and sani chemicals
- Exceeds SAE J2006-R1, and ABYC & NMMA P-1 exhaust standards
- Lloyd's Registry Type Approved Cert. 02/00029
- Black high-temp EDPM rubber 280 degrees F mac
- * Recommend double clamping with stainless steel T-bolt or Constant-Torque clamps

Our Price: $178.75
1-1/4 inch HW Flex Water Hose 25 1-1/4 inch HW Flex Water Hose 25

Wet Exhaust & Water Hose (Trident Marine)
( SAE J2006 & Lloyd's)
- I.D.: 1-1/4"
- Black w/blue stripe
- For longer bent connections
- Smaller inside diameters for engine intake, critical water, drain, scupper bilge & sanitation uses
- Extra heavy tube and cover with wire helix between 2 ply reinforcement provides excellent flexibility and bend radius
- Resists heat, ozone, exhaust, sani chemicals, panting and collapse
- Exceeds (SAE J2006-R2, and ABYC & NMMA P-1 exhaust standards
- Lloyd's Registry Type Approved Cert. 02/00029
- Black high-temp EDPM rubber 280 degrees F max
- *Recommend double clamping with stainless steel T-bolt or Constant-Torque clamps

Our Price: $189.00
3 in SW Exhaust 12.5' 3 in SW Exhaust 12.5'

Wet Exhaust & Water Hose (Trident Marine)
( SAE J2006 & Lloyd's)
- I.D.: 3"
- Length: 12.5'
- For short, straight connections
- In smaller I.D.'s for critical engine coolant & circulation, heat exchanger and discharge uses
- Extra heavy tube and cover with 2 to 6 ply reinforcement resists heat, aging, ozone, exhaust and sani chemicals
- Exceeds SAE J2006-R1 adn ABYC & NMMA P-1 exhaust standards
- Lloyd's Registry Type Approved Cert. 02/00029
- Black high-temp EDPM rubber 280 degrees F max
- * Recommend double clamping with stainless steel T-bolt or Constant-Torque clamps

Our Price: $196.64
2-1/2 in HW Hose 12.5 ft 2-1/2 in HW Hose 12.5 ft

Wet Exhaust & Water Hose (Trident Marine)
(SAE J2006 & Lloyd's)
- I.D.: 2-1/2"
- Length: 12.5'
- Black w/blue stripe
- For longer, bent connections
- In smaller I.D.'s for engine intake, critical water, drain, scupper bilge & sanitation uses
- Extra heavy tube and cover with wire helix between 2 ply reinforcement provides excellent flexibility and bend radius
- Resists heat, ozone, exhaust, sani chemicals, panting and collapse
- Exceeds SAE J2006-R2 and ABYC & NMMA P-1 exhaust standards
- Lloyd's Registry Type Approved Cert. 02/00029
- Black high-temp EDPM rubber 280 degrees F max
- * Recommend double clamping with stainless steel T-bolt or Constant-Torque clamps

Our Price: $200.00
3 inch HW Hose 12.5 ft 3 inch HW Hose 12.5 ft

Wet Exhaust & Water Hose (Trident Marine)
(SAE J2006 & Lloyd's)
- I.D.: 3"
- Length: 12.5'
- Black w/blue stripe
- For longer, bent connections
- In smaller I.D.'s for engine intake, critical water, drain, scupper bilge & sanitation uses
- Extra heavy tube and cover with wire helix between 2 ply reinforcement provides excellent flexibility and bend radius
- Resists heat, ozone, exhaust, sani chemicals, panting and collapse
- Exceeds SAE J2006-R2 and ABYC & NMMA P-1 exhaust standards
- Lloyd's Registry Type Approved Cert. 02/00029
- Black high-temp EDPM rubber 280 degrees F max
- * Recommend double clamping with stainless steel T-bolt or Constant-Torque clamps

Our Price: $208.48
4 in SW Exhaust Hose per 12.5 ft 4 in SW Exhaust Hose per 12.5 ft

Wet Exhaust & Water Hose (Trident Marine)
( SAE J2006 & Lloyd's)
- I.D.: 4"
- Length: 12.5'
- Black w/blue stripe
- For short, straight connections
- In smaller I.D.'s for critical engine coolant & circulation, heat exchanger and discharge uses
- Extra heavy tube and cover with 2 to 6 ply reinforcement resists heat, aging, ozone, exhaust and sani chemicals
- Exceeds SAE J2006-R1 and ABYC & NMMA P-1 exhaust standards
- Lloyd's Registry Type Approved Cert. 02/00029
- Black high-temp EDPM rubber 280 degrees F max
- * Recommend double clamping with stainless steel T-bolt or Constant-Torque clamps

Our Price: $240.42
4 inch HW Hose 12.5 ft 4 inch HW Hose 12.5 ft

Wet Exhaust & Water Hose (Trident Marine)
(SAE J2006 & Lloyd's)
- I.D.: 4"
- Length: 12.5'
- Black w/blue stripe
- For longer, bent connections
- In smaller I.D.'s for engine intake, critical water, drain, scupper bilge & sanitation uses
- Extra heavy tube and cover with wire helix between 2 ply reinforcement provides excellent flexibility and bend radius
- Resists heat, ozone, exhaust, sani chemicals, panting and collapse
- Exceeds SAE J2006-R2 and ABYC & NMMA P-1 exhaust standards
- Lloyd's Registry Type Approved Cert. 02/00029
- Black high-temp EDPM rubber 280 degrees F max
- * Recommend double clamping with stainless steel T-bolt or Constant-Torque clamps

Our Price: $288.06
3  1/2 SW  Exhaust Hose 12.5' 3 1/2 SW Exhaust Hose 12.5'

Wet Exhaust & Water Hose (Trident Marine)
( SAE J2006 & Lloyd's)
- I.D.: 3-1/2"
- Length: 12.5'
- Black w/blue stripe
- For short, straight connections
- In smaller I.D.'s for critical engine coolant & circulation, heat exchanger and discharge uses
- Extra heavy tube and cover with 2 to 6 ply reinforcement resists heat, aging, ozone, exhaust and sani chemicals
- Exceeds SAE J2006-R1 and ABYC & NMMA P-1 exhaust standards
- Lloyd's Registry Type Approved Cert. 02/00029
- Black high-temp EDPM rubber 280 degrees F max
- * Recommend double clamping with stainless steel T-bolt or Constant-Torque clamps

Our Price: $299.13
5 in HW Hose 12.5 5 in HW Hose 12.5

Wet Exhaust & Water Hose (Trident Marine)
(SAE J2006 & Lloyd's)
- I.D.: 5"
- Length: 12.5'
- Black w/blue stripe
- For longer, bent connections
- In smaller I.D.'s for engine intake, critical water, drain, scupper bilge & sanitation uses
- Extra heavy tube and cover with wire helix between 2 ply reinforcement provides excellent flexibility and bend radius
- Resists heat, ozone, exhaust, sani chemicals, panting and collapse
- Exceeds SAE J2006-R2 and ABYC & NMMA P-1 exhaust standards
- Lloyd's Registry Type Approved Cert. 02/00029
- Black high-temp EDPM rubber 280 degrees F max
- * Recommend double clamping with stainless steel T-bolt or Constant Torque clamps

Our Price: $328.00
3-1/2 in HW Hose 12.5 ft. 3-1/2 in HW Hose 12.5 ft.

Wet Exhaust & Water Hose (Trident Marine)
(SAE J2006 & Lloyd's)
- I.D.: 3-1/2"
- Length: 12.5'
- Black w/blue stripe
- For longer, bent connections
- In smaller I.D.'s for engine intake, critical water, drain, scupper bilge & sanitation uses
- Extra heavy tube and cover with wire helix between 2 ply reinforcement provides excellent flexibility and bend radius
- Resists heat, ozone, exhaust, sani chemicals, panting and collapse
- Exceeds SAE J2006-R2 and ABYC & NMMA P-1 exhaust standards
- Lloyd's Registry Type Approved Cert. 02/00029
- Black high-temp EDPM rubber 280 degrees F max
- * Recommend double clamping with stainless steel T-bolt or Constant-Torque clamps

Our Price: $345.88
5 SW  Exhaust Hose 12.5 ft 5 SW Exhaust Hose 12.5 ft

Wet Exhaust & Water Hose (Trident Marine)
(SAE J2006 & Lloyd's)
- I.D.: 5"
- Length: 12.5'
- Black w/blue stripe
- For short, straight connections
- In smaller I.D.'s for critical engine coolant & circulation, heat exchanger and discharge uses
- Extra heavy tube and cover with 2 to 6 ply reinforcement resists heat, aging, ozone, exhaust and sani chemicals
- Exceeds SAE J2006-R1 and ABYC & NMMA P-1 exhaust standards
- Lloyd's Registry Type Approved Cert. 02/00029
- Black high-temp EDPM rubber 280 degrees F max
- * Recommend double clamping with stainless steel T-bolt or Constant-Torque clamps

Our Price: $367.38
1-1/2 in HW Hose (50 ft) 1-1/2 in HW Hose (50 ft)

Wet Exhaust & Water Hose (Trident Marine)
( SAE J2006 & Lloyd's)
- I.D.: 1-1/2"
- Length: 50'
- Black w/blue stripe
- For longer, bent connections
- In smaller I.D.'s for engine intake, critical water, drain, scupper bilge & sanitation uses
- Extra heavy tube and cover with wire helix between 2 ply reinforcement provides excellent flexibility and bend radius
- Resists heat, ozone, exhaust, sani chemicals, panting and collapse
- Exceeds SAE J2006-R2 and ABYC & NMMA P-1 exhaust standards
- Lloyd's Registry Type Approved Cert. 02/00029
- Black high-temp EDPM rubber 280 degrees F max
- * Recommend double clamping with stainless steel T-bolt or Constant Torque clamps

Our Price: $372.38
6 in SW Hose  12.5 ft 6 in SW Hose 12.5 ft

Wet Exhaust & Water Hose (Trident Marine)
( SAE J2006 & Lloyd's)
- I.D.: 6"
- Length: 12.5'
- Black w/blue stripe
- For short, straight connections
- In smaller I.D.'s for critical engine coolant & circulation, heat exchanger and discharge uses
- Extra heavy tube and cover with 2 to 6 ply reinforcement resists heat, aging, ozone, exhaust and sani chemicals
- Exceeds SAE J2006-R1 and ABYC & NMMA P-1 exhaust standards
- Lloyd's Registry Type Approved Cert. 02/00029
- Black high-temp EDPM rubber 280 degrees F max
- * Recommend double clamping with stainless steel T-bolt or Constant-Torque clamps

Our Price: $375.00
1-1/2 in SW Hose 50 ft 1-1/2 in SW Hose 50 ft

Wet Exhaust & Water Hose (Trident Marine)
(SAE J2006 & Lloyd's)
- I.D.: 1-1/2"
- Length: 50'
- Black w/blue stripe
- For short, straight connections
- In smaller I.D.'s for critical engine coolant & circulation, heat exchanger and discharge uses
- Extra heavy tube and cover with 2 to 6 ply reinforcement resists heat, aging, ozone, exhaust and sani chemicals
- Exceeds SAE J2006-R1, and ABYC & NMMA P-1 exhaust standards
- Lloyd's Registry Type Approved Cert. 02/00029
- Black high-temp EDPM rubber 280 degree F max
- * Recommend double clamping with stainless steel T-bolt or Constant-Torque clamps

Our Price: $420.00
6 in HW Hose 12.5 6 in HW Hose 12.5

Wet Exhaust & Water Hose (Trident Marine)
(SAE J2006 & Lloyd's)
- I.D.: 6"
- Length: 12.5'
- Black w/blue stripe
- For longer, bent connections
- In smaller I.D.'s for engine intake, critical water, drain, scupper bilge & sanitation uses
- Extra heavy tube and cover with wire helix between 2 ply reinforcement provides excellent flexibility and bend radius
- Resists heat, ozone, exhaust, sani chemicals, panting and collapse
- Exceeds SAE J2006-R2 and ABYC & NMMA P-1 exhaust standards
- Lloyd's Registry Type Approved Cert. 02/00029
- Black high-temp EDPM rubber 280 degrees F max
- * Recommend double clamping with stainless steel T-bolt or Constant-Torque clamps

Our Price: $446.63
   
 
1