Home > Hardware > Hatch Covers & Deck Plates > Hatches & Deck Plates
Sort By:
1
Cover plate 5-5/8 in white Cover Plate Round 5 Inch WHT Cover Plate 8 Inch Artic Wht
Cover Plate (Seachoice)
- Arctic white color Cover Plate
- Diameter: 5-5/8"

- UV stabilized.
- Acetone resistant polypropylene.

Cover Plate (Bernard Engraving)
- White
- Outer Diameter: 6.5" ; covers holes up to 5" in diameter and mounts with only four screws
- Designed to quickly seal or conceal installation holes, instrument panel holes and other access holes where ready entry is not a requirement
Cover Plate
- Arctic white color Cover Plate
- Diameter: 8"

- UV stabilized.
- Acetone resistant polypropylene.


Abs Deck Plate Blk/Clear Cntr5in Abs Deck Plate Blk/Clear 4 inch Abs Deck Plate Wht/Clear Cntr5in
Screw-Out Deck Plate w/Clear Cover (SeaDog)
- Injection Molded ABS/Polycarbonate
- Black
- Allows visual inspection of watertight compartments, storage lockers and fuel fittings without removing the lid
- Use silicone sealant on hull or deck surface when installing the deck plate
- Lubricate with Teflon grease or Vaseline and clean with hot, soapy water
- Avoid contact with acetone or strong solvents
- Fastener: #8 Flat Head
- A: 5-7/16"
- B: 6-3/4"
- C: 5-1/2"
- D: 6-1/8"
Screw-Out Deck Plate w/Clear Cover (SeaDog)
- Injection Molded ABS/Polycarbonate
- Black
- Allows visual inspection of watertight compartments, storage lockers and fuel fittings without removing the lid
- Use silicone sealant on hull or deck surface when installing the deck plate
- Lubricate with Teflon grease or Vaseline and clean with hot, soapy water
- Avoid contact with acetone or strong solvents
- Fastener: #8 Flat Head
- A: 4-7/16"
- B: 5-3/4"
- C: 4-1/2"
- D: 5-1/8"

Screw-Out Deck Plate w/Clear Cover (SeaDog)
- Injection Molded ABS/Polycarbonate
- White
- Allows visual inspection of watertight compartments, storage lockers and fuel fittings without removing the lid
- Use silicone sealant on hull or deck surface when installing the deck plate
- Lubricate with Teflon grease or Vaseline and clean with hot, soapy water
- Avoid contact with acetone or strong solvents
- Fastener: #8 Flat Head
- A: 5-7/16"
- B: 6-3/4"
- C: 5-1/2"
- D: 6-1/8"
6 inch Inspection Plate Polar Wh IPS Handle Kit Polor White 8 inch Inspection Plate Polar Wh
Access Plate (Hi-Tide Manufacturing Group)
- Diameter: 6"
- Features:
- Design naturally sheds water
- Water resistant side crush seal design
- Designed for vertical or horizontal applications
- Hidden fastener design
- UV and weather resistant Saralon resin
- Engineered for the toughest marine elements
- Easy access, no tools required
Handle Kit (Hi-Tide Manufacturing Group)
- Polar White
Access Plate (Hi-Tide Manufacturing Group)
- Diameter: 8"
- Features:
- Design naturally sheds water
- Water resistant side crush seal design
- Designed for vertical and horizontal applications
- Hidden fastener design
- UV and weather resistant Saralon resin
- Engineered for the toughest marine elements
- Easy access, no tools required
Quarter-Turn Deck Plate 8 inch Abs Deck Plate Wht/Clear Ctr 6in Rubber Weather Seal w/ PSA..1/2
Quarter-Turn Deck Plate (SeaDog)
- Injection Molded ABS/Polycarbonate
- Black
- Lid Texture is Smooth
- Sold as Each
- UV Stable
- New locking system that prevents over tightening, jamming and cross threading
- Easy to open and close
- A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal
- Avoid contact with acetone or strong solvents
- Fastener: #8 Flat Head, Not Included
- A: 8-5/16"
- B: 9-7/8"
- C: 8-1/4"
- D: 8-15/16"
Screw-Out Deck Plate w/Clear Cover (SeaDog)
- Injection Molded ABS/Polycarbonate
- White
- Clear polycarbonate lid allows visual inspection of watertight compartments, storage lockers and fuel fittings without removing the lid.
- Use silicone sealant on hull or deck surface when installing the deck plate
- Lubricate with Teflon grease or Vaseline and clean with hot, soapy water
- Avoid contact with acetone or strong solvents
- Fastener: #8 Flat Head, Not Included
- A: 6-1/2"
- B: 8-1/8"
- C: 6-1/2"
- D: 7-1/4"
Rubber Weather Seal (TACO)
- 1/2" x 1/2"
- Synthetic Rubber
- Black
- Absorbs shock and reduces vibration
- Durable EDPM synthetic rubber compound offers superior resistance to water absorption, sunlight damage and extreme temperatures
- With adhesive backing, it's ideal for livewells, exterior doors, instrument covers and electronic boxes
- Features and Benefits:
- Medium closed cell density durable flexible sponge rubber
- Heavy duty self-adhesive backing for convenient installation
- Prevents leaks and reduces rattling
Deck Plate 6 inch 13in x 17in Tub Drop in Tub 11 x 15
Deck Plate 6 inch
Our Price: $37.99
13in x 17in Tub
Our Price: $44.45
Drop in Tub 11 x 15
Our Price: $44.99
Deck Plate (Hi-Tide Manufacturing Group)
- Diameter: 6"
- Features:
- Jim Black Deck Plate with Pull Handle
- Water resistant seal
- Designed for vertical and horizontal applications
- Hidden fastener design
- UV and weather resistant Saralon resin
- Engineered for the toughest marine elements
- Easy access, no tool required
Drop-in Tub (Hi-Tide Manufacturing Group)
- Outside Dimensions: 13" x 17"
- Inside Dimensions: 10.5" x 14.5" x 9"
- Cutout Dimensions: 11.25" x 15.25"
- Features:
- Injection molded and vacuum formed tubs for a lifetime of durability
- Provides extra utility with Innovative Hatch Series
- Cost effective way to utilize valuable storage
- Unique fastening system makes for an easy installation
Drop-in Tub (Hi-Tide Manufacturing Group)
- Outside Dimensions: 11" x 15"
- Inside Dimensions : 8.5" x 12.5" x 8"
- Cutout Dimensions: 9.25" x 13.25"
- Features:
- Injection molded and vacuum formed tubs for a lifetime of durability
- Provides extra utility with Innovative Hatch Series
- Cost effective was to utilize valuable storage
- Unique fastening system makes for an easy installation
Deck Plate 8 inch Deck Plate 9 x14 11in x 15in Hatch Polar White
Deck Plate 8 inch
Our Price: $44.99
Deck Plate 9 x14
Our Price: $51.99
Deck Plate (Hi-Tide Manufacturing Group)
- Diameter: 8"
- Features:
- Jim Black Deck Plate with pull handle
- Water resistant seal
- Designed for vertical and horizontal applications
- Hidden fastener design
- UV and weather resistant Saralon resin
- Engineered for the toughest marine elements
- Easy access, not tools required
Access Plate (Hi-Tide Manufacturing Group)
- 9" x 14"
- Features:
- Design naturally sheds water
- Water Resistant Side Crush Seal Design
- Designed for vertical and horizontal applications
- Hidden Fastener Design
- UV and Weather Resistant Saralon Resin
- Engineered for the toughest marine elements
- Easy Access, No Tools Required
Hatch (Hi-Tide Manufacturing Group)
- Outside Dimensions: 11" x 15"
- Inside Dimensions: 8.5" x 12.5"
- Cutout Dimensions: 9.25" x 13.25"
- Features:
- Hidden fastener
- Door opens past 180 degrees
- Larger inside dimensions
- Easy cut out with 3/8" clearance from start of flange to beginning of screw hole
- 316 stainless steel hinge
- OEM can screw thru the hinge into the deck for added strength and durability
- In-laid gasket to ensure a good seal every time
- Saralon resin for a lifetime
- Saralon 2 resin Handles with a positive stop and clock secured by a 316 SS pin
- Design naturally sheds water
- CE Certified
9in x19in Hatch Polar White 11in x 19in Hatch Polar White 13in x 17in  Hatch Polar White
Hatch (Hi-Tide Manufacturing Group)
- Outside Dimensions: 9" x 19"
- Inside Dimensions: 6.5" x 16.5"
- Cutout Dimensions: 7.25" x 17.25"
- Features:
- Hidden Fastener
- Door opens past 180 degrees
- Larger inside dimensions
- Easy cut out with 3/8" clearance from start of flange to beginning of screw hinge
- 316 stainless steel hinge
- OEM can screw thru the hinge into the deck for added strength and durability
- In-laid gasket to ensure a good seal every time
- Saralon resin for a lifetime
- Saralon 2 resin Handles with a positive stop and clock secured by a 316 SS pin
- Design naturally sheds water
- CE Certified
Hatch (Hi-Tide Manufacturing Group)
- Outside Dimensions: 11" x 19"
- Inside Dimensions: 8.5" x 16.5"
- Cutout Dimensions: 9.25" x 17.25"
- Features:
- Hidden Fastner
- Door opens past 180 degrees
- Larger inside dimensions
- Easy cut out with 3/8" clearance from start of flange to beginning of screw hole
- 316 stainless steel hinge
- OEM can screw thru the hing into the deck for added strength and durability
- In-laid gasket to ensure a good seal every time
- Saralon resin for a lifetime
- Saralon 2 resin Handles with a positive stop and clock secured by a 316 SS pon
- Design naturally sheds water
- CE Certified
Hatch (Hi-Tide Manufacturing Group)
- Outside Dimensions: 13" x 17"
- Inside Dimensions: 10.5" x 14.5"
- Cutout Dimensions: 11.25" x 15.25"
- Features:
- Hidden Fastener
- Door opens past 180 degrees
- Larger inside dimensions
- Easy cut with 3/8" clearance from start of flange to beginning of screw hole
- 316 stainless steel hinge
- OEM can screw thru the hinge into the deck for added strength and durability
- In-laid gasket to ensure a good seal every time
- Saralon resin for a lifetime
- Saralon 2 resin Handles with a positive stop and click secured by a 316 SS pin
- Design naturally sheds water
- CE Certified
16in x 18in Hatch Polar White 13in x 23in  Hatch  Polar White 11inx 15in  Tackle Center Polar
Hatch (Hi-Tide Manufacturing Group)
- Outside Dimensions: 16" x 18"
- Inside Dimensions: 13.5" x 15.5"
- Cutout Dimensions: 14.25" x 16.25"
- Features:
- Hidden Fastener
- Door opens past 180 degrees
- Larger inside dimensions
- Easy cut out with 3/8" clearance from start of flange to beginning of screw hole
- 316 stainless steel hinge
- OEM can screw thru the hinge into the deck for added strength and durability
- In-laid gasket to ensure a good seal every time
- Interchangeable Handles; IPS Butterfly, Orcas, Gem, Southco slam latches for large production runs
- Interchangeable Handle options only available for large production runs
- Saralon resin for a lifetime
- Saralon 2 resin Handles with a positive stop and click secured by a 316 SS pin
- Design naturally sheds water
- CE Ceritifed
Hatch (Hi-Tide Manufacturing Group)
- Outside Dimensions: 13" x 23"
- Inside Dimensions: 10.5" x 20.5"
- Cutout Dimensions: 11.25" x 21.25"
- Features:
- Hidden Fastener
- Door opens past 180 degrees
- Larger inside dimensions
- Easy cut out with 3/8" clearance from start of flange to beginning of screw hole
- 316 stainless steel hinge
- OEM can screw thru the hinge into the deck for added strength and durability
- In-laid gasket to ensure a good seal every time
- Saralon resin for a lifetime
- Saralon 2 resin Handles with a positive stop and click secured by a 316 SS pin
- Design naturally sheds water
- CE Certified
Tackle Center (Hi-Tide Manufacturing Group)
- Outside Dimensions: 11" x 15" x 10"
- Inside Dimensions: 8.5" x 12.5"
- Cutout Dimensions: 9.25" x 13.25"
- Features:
- Hidden Fastener
- Door opens past 180 degrees
- Larger inside dimensions
- Easy cut out with 3/8" clearance from start of flange to beginning of screw hole
- 316 stainless steel hinge
- OEM can screw thru the hinge into the deck for added strength and durability
- In-laid gasket to ensure a good seal every time
- Saralon resin for a lifetime
- Saralon 2 resin Handles with a positive stop and click secured by a 316 SS pin
- Design naturally sheds water
- Plano inserts
- Injection Molded Tubs for a lifetime of use
- CE Certified
13in x 30in Hatch Polar White Tackel Center 13 x 17 Large
Hatch (Hi-Tide Manufacturing Group)
- Outside Dimensions: 13" x 30"
- Inside Dimensions: 10.5" x 27.5"
- Cutout Dimensions: 11.25" x 28.25"
- Features:
- Hidden Fastener
- Door opens past 180 degrees
- Larger inside dimensions
- Easy cut out with 3/8" clearance from start of flange to beginning of screw hole
- 316 stainless steel hinge
- OEM can screw thru the hinge into the deck for added strength and durability
- In-laid gasket to ensure a good seal every time
- Saralon resin for a lifetime
- Saralon 2 resin Handles with a positive stop and click secured by a 316 SS pin
- Design naturally sheds water
- CE Certified
Tackle Center (Hi-Tide Manufacturing Group)
- Outside Dimensions: 13" x 17" x 12"
- Inside Dimensions: 10.5" x 14.5"
- Cutout Dimensions: 11.25" x 15.25"
- Features:
- Hidden Fastener
- Door opens past 180 degrees
- Larger inside dimensions
- Easy cut out with 3/8" clearance from start of flange to beginning of screw hole
- 316 stainless steel hinge
- OEM can screw thru the hinge into the deck for added strength and durability
- In-laid gasket to ensure a good seal every time
- Saralon resin for a lifetime
- Saralon 2 resin Handles with a positive stop and click secured by a 316 SS pin
- Design naturally sheds water
- Injection Molded Tubs for a lifetime of use
- CE Certified
- 4 Plano 3700 Series Tackle Inserts
   
 
1