Home > Accessories > Rod Holder
Sort By:
1
Replacement Cap & Gasket Black Replacement Cap & Gasket Narrow Gunnel Flush Mount Rod Holder
- Injection Molded ABS
- Rod Holder angle is 30 Degrees
- Sold as Each
- Color is BLACK
- Fastener is # 10 Flat Head, Not Included
A - 10"
B - 1-5/8"
C - 2-3/16"
D - 3-1/4"
Narrow Gunnel Flush Mount Rod Holder
- Injection Molded ABS
- Rod Holder angle is 30 Degrees
- Sold as Each
- Color is WHITE
- Fastener is # 10 Flat Head, Not Included
A - 10"
B - 1-5/8"
C - 2-3/16"
D - 3-1/4"
Side Mount Rod Holder
- Injection Molded Polypropylene
- A molded-in standoff is located on the back of the rod holder allowing direct mounting to fit any flat surface
- Color is BLACK
- Fastener is #10 Round Head, Not Included
A - 11-11/16"
B - 1-3/4"
C - 6-1/4"
Side Mount Rod Holder
- Injection Molded Polypropylene
- A molded-in standoff is located on the back of the rod holder allowing direct mounting to fit any flat surface
- Color is WHITE
- Fastener is #10 Round Head, Not Included
A - 11-11/16"
B - 1-3/4"
C - 6-1/4"
Flush Mount Rod Holder
- Injection Molded ABS
- Sold as Each
- Rod Holder angle is 30 Degrees
- Color is BLACK
- No Cap
- Fastener is # 12 Flat Head, Not Included
A - 9-3/16"
B - 1-5/8"
C - 2-1/2"
D - 2-5/8"
Flush Mount Rod Holder
- Injection Molded ABS
- Sold as Each
- Rod Holder angle is 30 Degrees
- Color is WHITE
- No Cap
- Fastener is # 12 Flat Head, Not Included
A - 9-3/16"
B - 1-5/8"
C - 2-1/2"
D - 2-5/8"
Fillet Table Rail Mount Bracket - Square
- White in Color
- Fits Tubing Size 1-1/4" x 1-1/4"
- Used in conjunction with Fillet Table Rail Mount Adapter Plate and Hardware 326599-1 and Medium Fillet Table 326580-3 or Large Fillet Table 326585-3
ABS Plastic/Black. 90°. One piece injection molded ABS plastic allows easy installation. Drain hole pre-drilled in bottom. Fasteners: #12.
Flange4" L x 2-1/2" W
Size9-1/2" L x 1-1/4" ID
Knife & Pliers Holder
- Made from Polypropylene
- Great for storing you knives, pliers and fishing lures
- Includes #8 Flat Head Stainless Steel Fasteners
A - 3-7/8"
B - 2-1/4"
C - 8-7/8"
Two Pole Side Mount Rod Holder
- Injection Molded Polypropylene
- Two Pole Rod Holder is one piece, no assembly required. Built-in knife and lure holder.
- White In Color
A - 9"
B - 1-3/4"
C - 1-3/4"
D - 10-3/4"
E - 8"
F - 4-5/8"
Rod Storage Rack 3 Rod
Our Price: $13.95
Rail Mount Rod Holder
Our Price: $17.95

Rod Storage Rack
- Injection Molded Polypropylene
- Soft foam inserts hold rod securely, reducing damage from rough seas
- Holds Three Rods
- Fastener is # 8 Flat Head, Not Included
A - 7-13/16"
B - 2-7/16"
C - 4-3/16"
D - 1-15/16"
E - 2-7/8"

Three Pole Side Mount Rod Holder
- Injection Molded Polypropylene
- Three Pole Rod Holder is one piece, no assembly required
- Built in Knife, and lure holder
- Color is WHITE
A - 13-1/2"
B - 1-7/8"
C - 1-3/4"
D - 10-3/4"
E - 7"
F - 4-1/2"

Rail Mount Rod Holder BLACK
- Injection Molded Polypropylene
- Designed with a front mount adjustment screw, this allows easy adjustment without having to disassemble the rail mount brackets as required on competing models.
- Sea-Dog Line recommends using a safety line on the rod and/or reel when used with rail mount rod holders
- Tubing Size 7/8" - 1"
A - 11-3/4"
B - 1-3/4"
Rail Mount Rod Holder
Our Price: $18.95
Rail Mount Rod Holder WHITE
- Injection Molded Polypropylene
- The Sea-Dog Rail Mount Rod Holder is designed with a front mount adjustment screw. This allows easy adjustment without having to disassemble the rail mount brackets as required on competing models.
- Sea-Dog Line recommends using a safety line on the rod/or reel when used with rail mount rod holders
- Fits Tubing Size 7/8" - 1"
A - 11-3/4"
B - 1-3/4
Rail Mount Rod Holder - Square Rail - WHITE
- Injection Molded Polypropylene
- The Sea-Dog Rail Mount Rod Holder is designed with a front mount adjustment screw. This allows easy adjustment without having to disassemble the rail mount brackets as required on competing models.
- It is a quick and easy way to add rod holders to pontoon boats.
- Sea-Dog Line recommends using a safety line on the rod and/or reel when used with rail mount rod holders
- Fits Tubing Size 1-1/4" x 1-1/4"
A - 11-3/4"
B - 1-3/4"
Economy Flush Mount Rod Holder With Cap
- Formed 304 Stainless
- Includes plastic liner, mounting gasket & integral cap.
- Rod Holder angle is 30 Degrees
- Sold as Each
- Fastener is #12 Flat Head
A - 9-3/8"
B - 1-1/2"
C - 2-3/16"
D - 3"
Side Mount Rod Holder
Our Price: $26.95
  • 60º tube with watertight cap
  • 9 1/2" L x 1 7/8" I.D.
  • Stamped stainless steel construction
  • Full-length rubber liner
  • Contemporary round style flange design
Side Mount Rod Holder
- Formed 316 Stainless
- Sold as Each Only
- Stainless Steel mounting brackets are included
- Fastener is #8 Round Head
A - 9"
B - 1-5/8"
C - 3-13/16"
Designed for use with casting and spinning rod holders. Heavy-duty, deep-tooth gear lock securely holds rod holder in mounting base.
Side Mount Rod Holder
Our Price: $61.00
90 Degree Flush Mount Rod Holder with Cap
- Investment Cast 316 Stainless Steel
- Designed for smaller rod/reel combinations
- Includes plastic liner, integral cap and mounting gasket
- Sold as Each
- Fastener is #12 Flat Head, Not Included
A - 9-5/8"
B - 1-5/8"
C - 2-3/16"
D - 3"
Size9" L x 1-3/4" ID
Fits7/8" to 1" Dia
Stainless Steel Clamp On Rod Holder with black plastic liner. Can be used on vertical or horizontal rails.
Side Mount Rod Holder
- Formed 316 Stainless Steel
- Holder slides in when it use and out from plate when not in use for a lower profile
- Rod Holder angle is 30 Degrees
- Sold as Each
- Fastener is #10 Flat Head, Not Included
A - 9"
B - 1-13/16"
C - 2-15/16"
D - 3-1/4"
Gimbaled Rod Holder Mounting Accessory
- Injection Molded Polypropylene/Stainless
- Sold as Each Only
- Works on all SEADOG Fillet Tables
- Comes complete with hardware to mount to the table
- Great for mounting a variety of accessories
A - 1-13/16"
B - 2-15/16"
C - 12"
Fastener is 1/4" Flat Head
Fillet & Prep Table Rail Mount - Medium
- Injection Molded Polypropylene
- Includes the 326599-1 Rail Mount Adapter, the 327199-1 Removable Rail Mount Clamps (pair), and all necessary hardware
- Solid one-piece construction provides a strong long-lasting part that is easy to clean and maintain
- UV stabilized high-density polyethylene
- Measures 20" wide by 12-5/8" deep
- Rail Mounting System
- Assembles in minutes, with all assembly hardware included
- Easily accessible knife holder (3), and pliers holder (1)
- Knife and pliers not included
- Fits tubing 3/4"-1-1/4"
A - 20"
B - 12-5/8"
C - 13-1/2"
D - 2"
Fillet Table Rod Holder Mount - Medium
- Injection Molded Polypropylene/Stainless
- Easily adjustable, multi-position gimbaled rod holder mounting system included.
- Solid one-piece construction provides a strong long-lasting part that is easy to clean and maintain
- UV stabilized high-density polyethylene
- Measures 20" wide by 12-5/8" Deep
- Rod holder mounting system folds flat for easy storage
- Assembles in minutes, with all assembly hardware included
- Easily accessible knife holder (3) and pliers holder (1)
A - 20"
B - 12-5/8"
C - 12"
D - 2"
Fillet Table Rod Holder Mount - Large
- Injection Molded Polypropylene/Stainless
- Easily adjustable, multi-position gimbaled rod holder mounting system included
- Solid one-piece construction provides a strong long-lasting part that is easy to clean and maintain
- UV Stabilized high-density polyethylene
- Measures 30" Wide by 12-5/8" Deep
- Rod holder mounting system folds flat for easy storage
- Assemblies in minutes, with all assembly hardware included
- Easily accessible knife holder (6), pliers holder (2) and hose holder (2)
A - 30"
B - 12-5/8"
C - 12"
D - 2-3/8"
   
 
1
NEED HELP FILL OUT OUR -> PARTS REQUEST FORM