Home > Maintenance > Boat Paint > Boat Bottom Paint
Sort By:
1 2
Outdrive Aerosal Primer Blue Outdrive Aerosal Primer Blue

DriveSleek Outdrive Full Season Outdrive Aerosol (Blue Water Marine Paint)
- Blue
- 16 fl. oz
- Copper-Free
- For use on all props and underwater metals.
- Can be sprayed on all unpainted and previously painted surfaces.
- A high performance outdrive coating that contains no copper or tin.
- Recommended Markets : Propellers, shafts, bow thrusters, rudders, trim tabs
- Full Season Protecting
- Compatible with other existing Outdrive Coatings.
- Use a zinc chromate primer before applying.

- Spray the entire can, as the life of the paint is proportional to the mil thinkness of paint applied. Prior to launching, allow a minimum of overnight dry. Make sure the surface is clean and tight. Prime with 1-3 coats of Aerosol Primer, then apply the entire can of Outdrive

Our Price: $23.95
New Engl Copr Abl (Royal Blu) QT New Engl Copr Abl (Royal Blu) QT

New England Copper (Blue Water Marine Paint)
- 1 qt.
- Royal Blue
- Full Season Ablative 25% Copper provides full season antifouling protection against barnacles, algae and hydroids in salt and fresh water on boat bottoms only.
- Its ablative copolymer base renders a smooth finish with durability and abrasion resistance.
- New England Copper releases biocide by the exposure of paint film to the water.
- New England Copper has universal applicatioin over all types of properly prepared bottom paints (EXCEPT ALUMINUM).
- For use in low fouling and cold waters where fouling challenge is low.

- 400 SQ FT / GAL YIELDS 2 MILS D.F.T Time to Overcoat - 80D F - 8HRS. Time to Launch - 16 HRS, 2 Coats, 3rd on waterline.
- Alternative Product Replacements for : Internlux Epoxycop, Pettit Unepoxy, Pettit Unepoxy Plus, Interlux ACT, and Pettit Premium SSA

Our Price: $24.95
New Engl Copr Abl (Black) QT New Engl Copr Abl (Black) QT

New England Copper (Blue Water Marine Paint)
- 1 qt.
- Black
- Full Season Ablative 25% Copper provides full season antifouling protection against barnacles, algae and hydroids in salt and fresh water on boat bottoms only.
- Its ablative copolymer base renders a smooth finish with durability and abrasion resistance.
- New England Copper releases biocide by the exposure of paint film to the water.
- New England Copper has universal applicatioin over all types of properly prepared bottom paints (EXCEPT ALUMINUM).
- For use in low fouling and cold waters where fouling challenge is low.


- 400 SQ FT / GAL YIELDS 2 MILS D.F.T Time to Overcoat - 80D F - 8HRS. Time to Launch - 16 HRS, 2 Coats, 3rd on waterline.
- Alternative Product Replacements for : Internlux Epoxycop, Pettit Unepoxy, Pettit Unepoxy Plus, Interlux ACT, and Pettit Premium SSA

Our Price: $24.95
New Engl Copr Abl (Regata Red) Q New Engl Copr Abl (Regata Red) Q

New England Copper (Blue Water Marine Paint)
- 1 qt.
- Regatta Red
- Full Season Ablative 25% Copper provides full season antifouling protection against barnacles, algae and hydroids in salt and fresh water on boat bottoms only.
- Its ablative copolymer base renders a smooth finish with durability and abrasion resistance.
- New England Copper releases biocide by the exposure of paint film to the water.
- New England Copper has universal applicatioin over all types of properly prepared bottom paints (EXCEPT ALUMINUM).
- For use in low fouling and cold waters where fouling challenge is low.

- 400 SQ FT / GAL YIELDS 2 MILS D.F.T Time to Overcoat - 80D F - 8HRS. Time to Launch - 16 HRS, 2 Coats, 3rd on waterline.
- Alternative Product Replacements for : Internlux Epoxycop, Pettit Unepoxy, Pettit Unepoxy Plus, Interlux ACT, and Pettit Premium SSA

Our Price: $24.95
Barriershield Primer -Quart Gray Barriershield Primer -Quart Gray

Barriershield Primer (Blue Water Marine Paint)
- 1 qt
- Blue Gray
- One part antifouling sealer Barrier coat over incompatible/unknown antifouling's anticorrosive primer for underwater metals.
- Is an excellent primer on sanded fiberglass prior to application of antifouling.

Our Price: $25.95
Hard Copr shld 45 Royal Blue Qt Hard Copr shld 45 Royal Blue Qt

Copper Shield Hard (Blue Water Marine Paint)
- 1 qt.
- Royal Blue
- Full Season Modified Epoxy 45% Copper provides full season antifouling protection against barnacles, algae and hydroids in salt and fresh water on boat bottoms only.
- Its modified epoxy base renders a smooth finish with durability and abrasion resistance.
- Copper Shield 45 Hard releases biocide by the exposure of paint film to the water and has universal application over all types of properly prepared bottom paints (EXCEPT ALUMINUM).
- For use on fast fiberglass boats, as well as wood and steel hulls.

- 400 SQ FT / Gal Yields 2 Mils D.F.T
- Time to overcoat - 80D F - 8HRS
- Time to Launch - 16 HRS, 2 Coats, 3rd on waterline.

- Alternative Product Replacements for : Interlux Fiberglass BottomKote, Interlux Epoxycop, Pettit Unepoxy Plus, Pettit Unepoxy Standard and Seahawk A/F 33.

Our Price: $33.95
Hard Copr Shld 45 Marine Blk Hard Copr Shld 45 Marine Blk

Copper Shield Hard (Blue Water Marine Paint)
- 1 qt.
- Black
- Full Season Modified Epoxy 45% Copper provides full season antifouling protection against barnacles, algae and hydroids in salt and fresh water on boat bottoms only.
- Its modified epoxy base renders a smooth finish with durability and abrasion resistance.
- Copper Shield 45 Hard releases biocide by the exposure of paint film to the water and has universal application over all types of properly prepared bottom paints (EXCEPT ALUMINUM).
- For use on fast fiberglass boats, as well as wood and steel hulls.

- 400 SQ FT / Gal Yields 2 Mils D.F.T
- Time to overcoat - 80D F - 8HRS
- Time to Launch - 16 HRS, 2 Coats, 3rd on waterline.

- Alternative Product Replacements for : Interlux Fiberglass BottomKote, Interlux Epoxycop, Pettit Unepoxy Plus, Pettit Unepoxy Standard and Seahawk A/F 33.

Our Price: $33.95
Drivesleek Black Outdrive Aeroso Drivesleek Black Outdrive Aeroso

DriveSleek Outdrive Full Season Outdrive Aerosol (Blue Water Marine Paint)
- Black
- 16 fl. oz
- Copper-Free
- For use on all props and underwater metals.
- Can be sprayed on all unpainted and previously painted surfaces.
- A high performance outdrive coating that contains no copper or tin.
- Recommended Markets : Propellers, shafts, bow thrusters, rudders, trim tabs
- Full Season Protecting
- Compatible with other existing Outdrive Coatings.
- Use a zinc chromate primer before applying.

- Spray the entire can, as the life of the paint is proportional to the mil thinkness of paint applied. Prior to launching, allow a minimum of overnight dry. Make sure the surface is clean and tight. Prime with 1-3 coats of Aerosol Primer, then apply the entire can of Outdrive Spray

Our Price: $36.95
Ablative 45 - Qt (Royal Blue) Ablative 45 - Qt (Royal Blue)

Copper Shield (Blue Water Marine Paint)
- 1 qt.
- Royal Blue
- Multi-Season Ablative 45% Copper has a high cuprous oxide content with a coating that provides a self-polishing ablative technology.
- This coating will provide multi-season protection for moderate fouling conditions.
- No paint buildup will occur and eliminates the need for heavy sanding.
- Perfect for powerboats and sailboats in seasonal boating conditions. - Can be applied directly over properly prepared vinyl's epoxies and most any other hard or multi-season bottom paints.

- 400 SQ FT / Gal Yields 2 MILS D.F.T
- Time to overcoat - 80D F - 8HRS
- Time to launch - 16 HRS, 2 Coats, 3rd on waterline.

- Alternative Product Replacements for : Interlux Micron CSC, Pettit Horizons, and Seahawk Cukote.

Our Price: $42.95
Ablative 45 - Qt (Black) Ablative 45 - Qt (Black)

Copper Shield (Blue Water Marine Paint)
- 1 qt.
- Black
- Multi-Season Ablative 45% Copper has a high cuprous oxide content with a coating that provides a self-polishing ablative technology.
- This coating will provide multi-season protection for moderate fouling conditions.
- No paint buildup will occur and eliminates the need for heavy sanding.
- Perfect for powerboats and sailboats in seasonal boating conditions. - Can be applied directly over properly prepared vinyl's epoxies and most any other hard or multi-season bottom paints.

- 400 SQ FT / Gal Yields 2 MILS D.F.T
- Time to overcoat - 80D F - 8HRS
- Time to launch - 16 HRS, 2 Coats, 3rd on waterline.

- Alternative Product Replacements for : Interlux Micron CSC, Pettit Horizons, and Seahawk Cukote.

Our Price: $42.95
Gallon Kit Marine AC70 White Gallon Kit Marine AC70 White

Marine AC70 Modified Epoxy Primer (Blue Water Marine)
- 1 gal.
- White
- A surface tolerant, two part tar free epoxy anticorrosive primer.
- Epoxy anticorrosive coating (70% soilds) for use on the entire vessel: Underwater, topside, deck, house, water ballast tank, cofferdam, voids, cargo holds, and internal places.

- Alternative Product Replacements for :
International Paint Intertuf 262, and PPG/Ameron Amercoat 235

Our Price: $59.95
Kolor 45 White Qt Kolor 45 White Qt

Kolor (Blue Water Marine Paint)
- 1 qt.
- White
- Bright Colors, Aluminum, Trailerable Boats, Multi-Season Ablative 45% Copper Thiocyanate Aluminum & Fiberglass.
- Has the cleanest, brightest colors and the most selection for bottom paint on the market today.
- We have the whitest white, the bluest blue and the blackest, black.
- Combine all of that with multi-season self polishing ablative copolymer, and our bottom paint line is as effective as it is clean and vibrant.
- This product provides antifouling protection against barnacles, algae and hydroids in salt and fresh water on boat bottoms only.
- This product has universal application over all types of properly prepared bottom paints.
- For use on fiberglass, aluminum, wood & steel hulls.

- 400 SQ FT / Gal Yields 2 Mils D.F.T
- Time to overcoat - 80D F - 8HRS
- Time to Launch - 16 HRS, 2 Coats, 3rd on waterline.

- Alternative Product Replacements for : Interlux Trilux, Interlux Trilux 33 and Pettit Vivid.

Our Price: $60.75
Hard 67 - Qt (Royal Blue) Hard 67 - Qt (Royal Blue)

Copper Pro SCX Hard Slime Control Xtra (Blue Water Marine Paint)
- 1 qt.
- Royal Blue
- Full Season Boosted Modified Epoxy 67% Copper, 2% SCX
- Slime Control Xtra is the highest performance modified hard epoxy performance products on the market today.
- The highest copper content in our line, and in addition our performance booster SCX provides outstanding protection against slime, grass and weed.
- Continual release of biocide makes this modified hard epoxy most effective for anti-fouling protection.
- Superior protection against hard and soft growth in extreme fouling conditions.
- Perfect for powerboats and sailboats, and can be applied directly over properly prepared epoxies and vinyl's, and most any other hard bottom paints.
- 400 SQ Ft / Gal Yeilds 2 Mils D.F.T Time to Overcoat - 80D F - 8HRS Time to Launch - 16 HRS, 2 Coats, 3rd on waterline.

- Alternative Product Replacements for : Interlux Ultra, Pettit Trinidad SR, Pettit Trindad Pro, and Seahawk Tropikote Biocide Plus.

Our Price: $62.95
Hard  67 - Qt (Black) Hard 67 - Qt (Black)

Copper Pro SCX Hard Slime Control Xtra (Blue Water Marine Paint)
- 1 qt.
- Black
- Full Season Boosted Modified Epoxy 67% Copper, 2% SCX
- Slime Control Xtra is the highest performance modified hard epoxy performance products on the market today.
- The highest copper content in our line, and in addition our performance booster SCX provides outstanding protection against slime, grass and weed.
- Continual release of biocide makes this modified hard epoxy most effective for anti-fouling protection.
- Superior protection against hard and soft growth in extreme fouling conditions.
- Perfect for powerboats and sailboats, and can be applied directly over properly prepared epoxies and vinyl's, and most any other hard bottom paints.
- 400 SQ Ft / Gal Yeilds 2 Mils D.F.T Time to Overcoat - 80D F - 8HRS Time to Launch - 16 HRS, 2 Coats, 3rd on waterline.

- Alternative Product Replacements for : Interlux Ultra, Pettit Trinidad SR, Pettit Trindad Pro, and Seahawk Tropikote Biocide Plus.

Our Price: $62.95
Hard  67 - Qt (Admiral Green) Hard 67 - Qt (Admiral Green)

Copper Pro SCX Hard Slime Control Xtra (Blue Water Marine Paint)
- 1 qt.
- Admiral Green
- Full Season Boosted Modified Epoxy 67% Copper, 2% SCX
- Slime Control Xtra is the highest performance modified hard epoxy performance products on the market today.
- The highest copper content in our line, and in addition our performance booster SCX provides outstanding protection against slime, grass and weed.
- Continual release of biocide makes this modified hard epoxy most effective for anti-fouling protection.
- Superior protection against hard and soft growth in extreme fouling conditions.
- Perfect for powerboats and sailboats, and can be applied directly over properly prepared epoxies and vinyl's, and most any other hard bottom paints.
- 400 SQ Ft / Gal Yeilds 2 Mils D.F.T Time to Overcoat - 80D F - 8HRS Time to Launch - 16 HRS, 2 Coats, 3rd on waterline.

- Alternative Product Replacements for : Interlux Ultra, Pettit Trinidad SR, Pettit Trindad Pro, and Seahawk Tropikote Biocide Plus.

Our Price: $63.09
Abl SCX 67 - Qt (Royal Blue) Abl SCX 67 - Qt (Royal Blue)

Copper Pro SCX Slime Control Xtra (Blue Water Marine Paint)
- 1 qt.
- Royal Blue
- Multi-Season Boosted Ablative 67% Cooper, 2% SCX
- Slime Control Xtra is the highest performance ablative copolymer on the market today.
- The highest copper content in our line, and in addition our performance booster SCX provides outstanding protection against slime, grass and weed.
- Continual release of biocide makes this self polishing copolymer most effective for anti-fouling protection, with only minimal paint buildup.
- Tough, multi-season paint for superior protection against hard and soft growth in extreme fouling conditions, and can re-launch after extended haul-out while retaining orginial antifouling properties.
- Perfect for powerboats and sailboats, and can be applied directly over properly prepared ablatives, epoxies and vinyl's and most any other hard or ablative bottom paints.

Our Price: $66.95
Abl SCX 67 - Qt (Black) Abl SCX 67 - Qt (Black)

Copper Pro SCX Slime Control Extra (Blue Water Marine Paint)
- 1 qt.
- Black
- Multi-Season Boosted Ablative 67% Cooper, 2% SCX
- Slime Control Xtra is the highest performance ablative copolymer on the market today.
- The highest copper content in our line, and in addition our performance booster SCX provides outstanding protection against slime, grass and weed.
- Continual release of biocide makes this self polishing copolymer most effective for anti-fouling protection, with only minimal paint buildup.
- Tough, multi-season paint for superior protection against hard and soft growth in extreme fouling conditions, and can re-launch after extended haul-out while retaining orginial antifouling properties.
- Perfect for powerboats and sailboats, and can be applied directly over properly prepared ablatives, epoxies and vinyl's and most any other hard or ablative bottom paints.

Our Price: $66.95
Abl SCX 67 - Qt (Red) Abl SCX 67 - Qt (Red)

Copper Pro SCX Slime Control Xtra (Blue Water Marine Paint)
- 1 qt.
- Red
- Multi-Season Boosted Ablative 67% Cooper, 2% SCX - Slime Control Xtra is the highest performance ablative copolymer on the market today.
- The highest copper content in our line, and in addition our performance booster SCX provides outstanding protection against slime, grass and weed.
- Continual release of biocide makes this self polishing copolymer most effective for anti-fouling protection, with only minimal paint buildup.
- Tough, multi-season paint for superior protection against hard and soft growth in extreme fouling conditions, and can re-launch after extended haul-out while retaining orginial antifouling properties.
- Perfect for powerboats and sailboats, and can be applied directly over properly prepared ablatives, epoxies and vinyl's and most any other hard or ablative bottom paints.

Our Price: $66.95
Awl-Cat #3 Brushing Converter Awl-Cat #3 Brushing Converter

Awl-Cat#3 Brush Tpcot-Convr-Pt (AWL-Grip)
- G3010: Awl-Cat #2 converter is for use in Awlgrip and Awlcraft 2000 topcoats when spraying.
- H3002: Awl-cat #3 converter is used when brushing and rolling Awlgrip (G and H line topcoats).
- Mix by volume 2 parts Awlgrip Topcoat base component with 1 part Awl-cat #3/H3002 brushing converter until smooth, homogenous mixture is obtained. Add brushing reducer T0031.

Our Price: $68.95
New Engl Copr Abl (Royal Blu) Ga New Engl Copr Abl (Royal Blu) Ga

New England Copper (Blue Water Marine Paint)
- 1 gal.
- Royal Blue
- Full Season Ablative 25% Copper provides full season antifouling protection against barnacles, algae and hydroids in salt and fresh water on boat bottoms only.
- Its ablative copolymer base renders a smooth finish with durability and abrasion resistance.
- New England Copper releases biocide by the exposure of paint film to the water.
- New England Copper has universal applicatioin over all types of properly prepared bottom paints (EXCEPT ALUMINUM).
- For use in low fouling and cold waters where fouling challenge is low.

- 400 SQ FT / GAL YIELDS 2 MILS D.F.T Time to Overcoat - 80D F - 8HRS. Time to Launch - 16 HRS, 2 Coats, 3rd on waterline.
- Alternative Product Replacements for : Internlux Epoxycop, Pettit Unepoxy, Pettit Unepoxy Plus, Interlux ACT, and Pettit Premium SSA

Our Price: $82.95
New Engl Copr Abl (Black) Gal New Engl Copr Abl (Black) Gal

New England Copper (Blue Water Marine Paint)
- 1 gal.
- Black
- Full Season Ablative 25% Copper provides full season antifouling protection against barnacles, algae and hydroids in salt and fresh water on boat bottoms only.
- Its ablative copolymer base renders a smooth finish with durability and abrasion resistance.
- New England Copper releases biocide by the exposure of paint film to the water.
- New England Copper has universal applicatioin over all types of properly prepared bottom paints (EXCEPT ALUMINUM).
- For use in low fouling and cold waters where fouling challenge is low.

- 400 SQ FT / GAL YIELDS 2 MILS D.F.T Time to Overcoat - 80D F - 8HRS. Time to Launch - 16 HRS, 2 Coats, 3rd on waterline.
- Alternative Product Replacements for : Internlux Epoxycop, Pettit Unepoxy, Pettit Unepoxy Plus, Interlux ACT, and Pettit Premium SSA

Our Price: $82.95
New Engl Copr Abl (Regata Red) G New Engl Copr Abl (Regata Red) G

New England Copper (Blue Water Marine Paint)
- 1 gal.
- Regatta Red
- Full Season Ablative 25% Copper provides full season antifouling protection against barnacles, algae and hydroids in salt and fresh water on boat bottoms only.
- Its ablative copolymer base renders a smooth finish with durability and abrasion resistance.
- New England Copper releases biocide by the exposure of paint film to the water.
- New England Copper has universal applicatioin over all types of properly prepared bottom paints (EXCEPT ALUMINUM).
- For use in low fouling and cold waters where fouling challenge is low.

- 400 SQ FT / GAL YIELDS 2 MILS D.F.T Time to Overcoat - 80D F - 8HRS. Time to Launch - 16 HRS, 2 Coats, 3rd on waterline.
- Alternative Product Replacements for : Internlux Epoxycop, Pettit Unepoxy, Pettit Unepoxy Plus, Interlux ACT, and Pettit Premium SSA

Our Price: $82.95
High Build Epoxy Primer Gal Kit High Build Epoxy Primer Gal Kit

Bottom Protect High Build Epoxy Primer (Blue Water Marine Paint)
- 1 gal.
- 8000A/8000B
- Provides a seamless high build Epoxy Coating. This seamless high build epoxy creates a impermeable water barrier and eliminates any direct path for water migration.
- Is a heavy duty 3:1 epoxy coating that prevents water absorption and blistering of your fiberglass hull.
- The fast over coating application allows the professional or do-it-yourselfer applicator to achieve 10 mils of protection in a single weekend.
- No harmful methylene chloride, and has superior sag control resistance.

- Also an excellent primer for all underwater metal hulls, keels, aluminum, steel, lead, cast iron, stainless and bronze.
- Average Dry Time 75 Degrees Fahrenheit, or 23 Degrees Celsius: Dries to touch in 2 hours. Faster dry times in temperatures over 75 Degrees Fahrenheit, and slower dry times in temperatures cooler than 75 Degrees Fahrenheit. Can Re-coat with Bottom Protect Primer with self in 2 hours to 48 hours. After 48 hours, you MUST sand with 80 grit sandpaper before recoating with another coat of Bottom Protect Primer. When over coating with antifouling, allow 2 hours minimum to 4 hours, maximum. Faster dry times in temperatures over 75 Degrees F, and slower dry times n temperatures cooler than 75 Degrees F. After 4 hours you MUST sand with 80 grit sandpaper before application of antifouling paint, or apply another coat of Bottom Protect Primer and overcoat with the appropriate antif9ouling paint within the 2-4 hour over coat window.

Our Price: $94.95
Barriershield Primer - Gallon Barriershield Primer - Gallon

Barriershield Primer (Blue Water Marine Paint)
- 1 gal.
- One part antifouling sealer Barrier coat over incompatible/unknown antifouling's anticorrosive primer for underwater metals.
- Is an excellent primer on sanded fiberglass prior to application of antifouling.

Our Price: $106.95
Hard Copr Sheild 45 Royal Blu, G Hard Copr Sheild 45 Royal Blu, G

Copper Shield Hard (Blue Water Marine Paint)
- 1 gal.
- Royal Blue
- Full Season Modified Epoxy 45% Copper provides full season antifouling protection against barnacles, algae and hydroids in salt and fresh water on boat bottoms only.
- Its modified epoxy base renders a smooth finish with durability and abrasion resistance.
- Copper Shield 45 Hard releases biocide by the exposure of paint film to the water and has universal application over all types of properly prepared bottom paints (EXCEPT ALUMINUM).
- For use on fast fiberglass boats, as well as wood and steel hulls.

- 400 SQ FT / Gal Yields 2 Mils D.F.T
- Time to overcoat - 80D F - 8HRS
- Time to Launch - 16 HRS, 2 Coats, 3rd on waterline.

- Alternative Product Replacements for : Interlux Fiberglass BottomKote, Interlux Epoxycop, Pettit Unepoxy Plus, Pettit Unepoxy Standard and Seahawk A/F 33.

Our Price: $109.95
Hard Copr Shld 45 Marine Blk Gl Hard Copr Shld 45 Marine Blk Gl

Copper Shield Hard (Blue Water Marine Paint)
- 1 gal.
- Black
- Full Season Modified Epoxy 45% Copper provides full season antifouling protection against barnacles, algae and hydroids in salt and fresh water on boat bottoms only.
- Its modified epoxy base renders a smooth finish with durability and abrasion resistance.
- Copper Shield 45 Hard releases biocide by the exposure of paint film to the water and has universal application over all types of properly prepared bottom paints (EXCEPT ALUMINUM).
- For use on fast fiberglass boats, as well as wood and steel hulls.

- 400 SQ FT / Gal Yields 2 Mils D.F.T
- Time to overcoat - 80D F - 8HRS
- Time to Launch - 16 HRS, 2 Coats, 3rd on waterline.

- Alternative Product Replacements for : Interlux Fiberglass BottomKote, Interlux Epoxycop, Pettit Unepoxy Plus, Pettit Unepoxy Standard and Seahawk A/F 33.

Our Price: $109.95
Hard Copr Shld 45 Regta Red Gl Hard Copr Shld 45 Regta Red Gl

Copper Shield Hard (Blue Water Marine Paint)
- 1 gal.
- Regatta Red
- Full Season Modified Epoxy 45% Copper provides full season antifouling protection against barnacles, algae and hydroids in salt and fresh water on boat bottoms only.
- Its modified epoxy base renders a smooth finish with durability and abrasion resistance.
- Copper Shield 45 Hard releases biocide by the exposure of paint film to the water and has universal application over all types of properly prepared bottom paints (EXCEPT ALUMINUM).
- For use on fast fiberglass boats, as well as wood and steel hulls.

- 400 SQ FT / Gal Yields 2 Mils D.F.T
- Time to overcoat - 80D F - 8HRS
- Time to Launch - 16 HRS, 2 Coats, 3rd on waterline.

- Alternative Product Replacements for : Interlux Fiberglass BottomKote, Interlux Epoxycop, Pettit Unepoxy Plus, Pettit Unepoxy Standard and Seahawk A/F 33.

Our Price: $109.95
Ablative 45 - Gal (Royal Blue Ablative 45 - Gal (Royal Blue

Copper Shield (Blue Water Marine Paint)
- 1 gal.
- Royal Blue
- Multi-Season Ablative 45% Copper has a high cuprous oxide content with a coating that provides a self-polishing ablative technology.
- This coating will provide multi-season protection for moderate fouling conditions.
- No paint buildup will occur and eliminates the need for heavy sanding.
- Perfect for powerboats and sailboats in seasonal boating conditions. - Can be applied directly over properly prepared vinyl's epoxies and most any other hard or multi-season bottom paints.

- 400 SQ FT / Gal Yields 2 MILS D.F.T
- Time to overcoat - 80D F - 8HRS
- Time to launch - 16 HRS, 2 Coats, 3rd on waterline.

- Alternative Product Replacements for : Interlux Micron CSC, Pettit Horizons, and Seahawk Cukote.

Our Price: $157.95
Ablative 45 - Gal (Black) Ablative 45 - Gal (Black)

Copper Shield (Blue Water Marine Paint)
- 1 gal.
- Black
- Multi-Season Ablative 45% Copper has a high cuprous oxide content with a coating that provides a self-polishing ablative technology.
- This coating will provide multi-season protection for moderate fouling conditions.
- No paint buildup will occur and eliminates the need for heavy sanding.
- Perfect for powerboats and sailboats in seasonal boating conditions. - Can be applied directly over properly prepared vinyl's epoxies and most any other hard or multi-season bottom paints.

- 400 SQ FT / Gal Yields 2 MILS D.F.T
- Time to overcoat - 80D F - 8HRS
- Time to launch - 16 HRS, 2 Coats, 3rd on waterline.

- Alternative Product Replacements for : Interlux Micron CSC, Pettit Horizons, and Seahawk Cukote.

Our Price: $157.95
Hard 67 Gal (Royal Blue) Hard 67 Gal (Royal Blue)

Copper Pro SCX Hard Slime Control Xtra (Blue Water Marine Paint)
- 1 gal.
- Royal Blue
- Full Season Boosted Modified Epoxy 67% Copper, 2% SCX - Slime Control Xtra is the highest performance modified hard epoxy performance products on the market today.
- The highest copper content in our line, and in addition our performance booster SCX provides outstanding protection against slime, grass and weed.
- Continual release of biocide makes this modified hard epoxy most effective for anti-fouling protection.
- Superior protection against hard and soft growth in extreme fouling conditions.
- Perfect for powerboats and sailboats, and can be applied directly over properly prepared epoxies and vinyl's, and most any other hard bottom paints.
- 400 SQ Ft / Gal Yeilds 2 Mils D.F.T Time to Overcoat - 80D F - 8HRS Time to Launch - 16 HRS, 2 Coats, 3rd on waterline.

- Alternative Product Replacements for : Interlux Ultra, Pettit Trinidad SR, Pettit Trindad Pro, and Seahawk Tropikote Biocide Plus.

Our Price: $223.95
   
 
1 2
NEED HELP FILL OUT OUR -> PARTS REQUEST FORM