Delrin Flush Pull - Small - Blac
Finger Pull - Small (SeaDog)
- Injection Molded Acetal
- Black
- Fastener: #6 Flat Head, Not Included
- Sold as Each Only
- A: 2-3/16"
- B: 1-3/4"
- C: 1-9/16"
- D: 11/16"
Flush Pull
Finger Pull - Large (SeaDog)
- Injection Molded Acetal
- White
- Sold as Each Only
- Fasteners: #6 Flat Head, Not Included
- A: 3-5/8"
- B: 2-3/8"
- C: 2-15/16"
- D: 1-3/4"
- E: 11/16"
Ring Pull
Ring Pull (SeaDog)
- Chrome Plated Cast Brass
- Sold as Each Only
- Fastener: #4 Flat Head, Not Included
- A: 1-7/16"
- B: 1-3/16"
- C: 1/2"
- D: 1/16"
- E: 1"
Stud Catch Pair 1-15/16, Brass
Stud Catch (SeaDog)
- Brass Chrome Plated
- Sold as Each Only
- Fasteners: #4 Flat Head, Not Included
- Finish is Brass
- Adjustable spring loaded ball catch that allows for easy adjustment of the holding strength of each catch depending on the door size. Strike enters three ways, from the front or from either side.
- A: 1-15/16"
- B: 3/8"
- C: 7/16"
Door Button
Stainless Door Button
Door Button (SeaDog)
- Stamped 304 Stainless/Injection Molded Nylon
- Comparable to Perko's #1217, without spring.
- Sold as Each Only
- Fastener: #8 Flat Head, Not Included
- A: 1-3/8"
- B: 3/4"
- C: 3/4"
- D: 1-1/4"
- E: 2-3/8"
- F: 2"
Door Stop Gray W/Ribs Right
T-H Marine Pontoon Door Stops With Ribs Fits Up to 1-1/4" TubingFor Pontoon Boats.
Injection molded, designed to fit 1-1/4" square tubing. Anti-rattle. Requires no welding. Simple installation with one #10 screw.
DOOR STOP GRAY WITH RIBS LEFT
T-H Marine Pontoon Door Stops With Ribs Fits Up to 1-1/4" TubingFor Pontoon Boats.
Injection molded, designed to fit 1-1/4" square tubing. Anti-rattle. Requires no welding. Simple installation with one #10 screw.
90 Degree Angle Bracket
90 Degree Angle Bracket (SeaDog)
- Stamped 304 Stainless
- Sold in Pairs Only
- Fastener: #8 Flat Head, Not Included
- A: 2-3/8"
- B: 2-3/8"
- C: 1-3/16"
- D: 1-3/16"
- E: 9/16"
Round Ring Pull
Round Ring Pull (SeaDog)
- Chrome Plated Cast Brass
- Sold as Each Only
- Fastener: #8 Flat Head, Not Included
- A: 1-5/8"
- B: 7/16"
- C: 1-1/16"
- D: 1/16"
Barrel Bolt
Barrel Bolt (SeaDog)
- Extruded Brass Chrome Plated
- Sold as Each Only
- Fastener: #6 Flat Head, Not Included
- A: 1-1/2"
- B: 3/8"
- C: 1/2"
- D: 1"
Elbow Catch
Elbow Catch (SeaDog)
- Extruded Brass
- Sold as Pair Only
- Fasteners: #6 Flat Head
- A: 1-1/8"
- B: 1-5/16"
Stud Catch
Stud Catch (SeaDog)
- Brass Chrome Plated
- Sold as Each Only
- Fasteners: #4 Flat Head, Not Included
- Adjustable spring loaded ball catch that allows for easy adjustment of the holding strength of each catch depending on the door size. Strike enters three ways, from the front or from either side.
- A: 1-11/16"
- B: 5/16"
- C: 3/8"
Barrel Bolt
Barrel Bolt (SeaDog)
- Extruded Brass Chrome Plated
- Sold as Each Only
- Fastener: #6 Flat Head, Not Included
- A: 2"
- B: 3/8"
- C: 1/2"
- D: 1"
Door Hook
Door Hook (SeaDog)
- Chrome Plated Brass
- Fastener: #6 Flat Head, Not Included
- Sold as Each Only
- A: 1-1/2"
- B: 5/8"
- C: 11/16"
- D: 2-1/4"
Barrel Bolt
Barrel Bolt (SeaDog)
- Extruded Brass Chrome Plated
- Sold as Each Only
- Fastener: #6 Flat Head, Not Included
- A: 2-1/2"
- B: 3/8"
- C: 1/2"
- D: 1"
Decorative Door Hook
Decorative Door Hook (SeaDog)
- Chrome Plated Cast Brass
- Sold as Each Only
- Fastener: #6 Flat Head, Not Included
- A: 1-3/4"
- B: 5/8"
- C: 11/16"
- D: 2-1/2"
Barrel Bolt
Barrel Bolt (SeaDog)
- Extruded Brass Chrome Plated
- Sold as Each Only
- Fastener: #6 Flat Head, Not Included
- A: 3"
- B: 3/8"
- C: 1/2"
- D: 1"
Nylon Slam Latch - White
Slam Latch (SeaDog)
- Injection Molded Nylon
- White
- Sold as Each Only
- Fasteners: # 12 Round Head, Not Included
- A: 2-7/16"
- B: 1-1/2"
- Cut-Out Hole 2"
Nylon Slam Latch - Black
Slam Latch (SeaDog)
- Injection Molded Nylon
- Black
- Sold as Each Only
- Fasteners: # 12 Round Head, Not Included
- A: 2-7/16"
- B: 1-1/2"
- Cut-Out Hole 2"
Ring Pull
Ring Pull (SeaDog)
- Chrome Plated Cast Brass
- Sold as Each Only
- Fastener: #6 Flat Head, Not Included
- A: 1-3/4"
- B: 1-1/2"
- C: 1/2"
- D: 1/8"
- E: 1-1/8"
Cam Lock
Cam Lock (SeaDog)
- Stamped 304 Stainless/Die Cast Zinc Lock
- Every Cam Lock comes with two matching keys
- Random key availability from Cam Lock to Cam Lock
- A: 1-9/16" - 1-7/8" (Locking Arm)
- B: 1-3/16"
- C: 5/8"
- D: 1/2"
- E: 15/16"
Decorative Door Hook
Decorative Door Hook (SeaDog)
- Chrome Plated Cast Brass
- Sold as Each Only
- Fastener: #6 Flat Head, Not Included
- A: 2-3/4"
- B: 5/8"
- C: 11/16"
- D: 3-1/2"
Door Stop Button
Door Stop Button (SeaDog)
- Chrome Plated Cast Brass
- A very simple, low profile, sturdy hardware piece that will keep doors closed.
- Fasteners: #6 Flat Head, Not Included
- A: 1-3/16"
- B: 1/2"
- C: 1"
- D: 1-3/4"
- E: 1-11/16"
Round Ring Pull
Round Ring Pull (SeaDog)
- Chrome Plated Cast Brass
- Sold as Each Only
- Fastener: #8 Flat Head, Not Included
- A: 2"
- B: 7/16"
- C: 1-1/16"
- D: 1/16"
Swivel Hasp
Swivel Hasp (SeaDog)
- Stamped 304 Stainless
- Sold as Each
- Fastener: #8 Flat Head, Not Included
- A: 2-11/16"
- B: 2-1/16"
- C: 1-1/16"
- D: 7/8"
- E: 5/16"
Push Button Rim Latch
Push Button Rim Latch (SeaDog)
- Plastic/ Plastic Housing
- Finish on Plastic is Polished Chrome
- Fasteners: #6 Round Head
- Display parts come complete with both strike plates. Hole spacing on flat strike plate is 1-7/8"; hole spacing on 90 degree strike plate is 1-3/16". Both Require a #4 Flat Head Fastener.
- Sold as Each Only
- Max Door Thickness is 1"
- A: 1-15/16"
- B: 1-7/8"
- C: 2-1/16"
- D: 1"
Ring Pull- Surface Mount-Lock SS
Surface Mount Locking Ring Pull (SeaDog)
- Stamped 304 Stainless/Die Cast Zinc Lock
- Every lift ring comes with two matching keys.
- Random Key availability only from lift ring to lift ring
- Sold as Each Only
- A: 2-1/8"
- B: 1-15/16"
- C: 1-1/16"
- D: 3/16"
- E: 15/16"
- F: 1-7/16" - 1-7/8" (Locking Arm)
- G: 1/2"
Ring Pull
Ring Pull (SeaDog)
- Chrome Plated Cast Brass
- Sold as Each Only
- Fastener: #8 Flat Head, Not Included
- A: 2-1/2"
- B: 2"
- C: 3/16"
- D: 1/8"
- E: 1-1/2"
Lock, Glove Box
Locks & Latches (Sierra)
- Turn to open mechanism - no finger pull
- Non-locking version
- Totally corrosion resistant
- Black glass reinforced polyester
- Hole Size: 1"
- Depth: 1"
- Panel Thickness: 3/4"
Heavy Duty Swivel Hasp
Heavy Duty Swivel Hasp (SeaDog)
- Stamped 304 Stainless
- Style is Flush
- Sold as Each Only
- Fastener: #8 Flat Head
- A: 3-1/8"
- B: 2-5/16"
- C: 1-1/8"
- D: 15/16"
- E: 5/16"