Battery Strap 39in Black
Battery Strap
- Black
- Made from acid and gas resistant materials.
- Measures 39" long.
- Includes corrosion resistant hold down clamp with stainless steel screws.
Terminal Cap- Red (18-10) PVC
Terminal Cap (SeaDog)
- Injection Molded PVC
- Meets USCG requirements and ABYC recommendations for prevention of accidental grounding of battery terminals
- May be used on uninsulated high amperage stud connections on chargers, inverters, starters, windlasses, solenoids and other high amperage equipment
- Wire Gauge - 18-10
- A - 1-15/15"
- B - 7/8"
- C - 1/2"
- D - 1/8"
Terminal Cap- Red (8-4) PVC
Terminal Cap (SeaDog)
- Injection Molded PVC
- Cable Gauge - 8-2
- Meets USCG requirements and ABYC recommendations for prevention of accidental grounding of battery terminals
- May be used on uninsulated high amperage stud connections on chargers, inverters, starters, windlasses, solenoids and other high amperage equipment
- A - 2-3/16"
- B - 15/16"
- C - 11/16"
- D - 5/16"
Heat Shrink 3/16 Red
Primary Wire Heat Shrinkable Tubing
- Red
- 18-14 Gauge
- Expanded Diameter: 3/16"
- Shrunken Diameter: 1/8"
- Economical heat shrink ideal for general purpose applications
- Protects against corrosion
- Use to identify positive and negative
- Acts as a strain relief and prevents abrasion
- Material: Ethylene Vinyl Acetate
- Shrink Ratio: 2:1
- Operating Temperature: -67 degrees F to +221 degrees F
Red 4GA 16in Battery Cable
Switch-to-Starter Cable
- 4 Gauge
- Red
- Recommended for engine to ground connections
- Fits up to 3/8" stud
- 16" length
Blk 4Ga 16in Battery Cable
Switch-to-Starter Cable
- 4 Gauge
- Black
- Recommended for engine to ground connection
- Fits up to 3/8" stud
- 16" length
Batt Terms Covers 1/2 in PVC
Battery Terminal Covers (SeaDog)
- Injection Molded PVC
- Cable Gauge : 4, 2, 1
- Colors : Red/Black
- Satisfies USCG requirements and American Boat and Yacht Council recommendations for prevention of accidental grounding of battery terminals
- Will Fit most marine batteries as well as automotive batteries using add on marine terminals
- A - 1/2"
- B - 1-5/8"
- C - 1-11/16"
- D - 2-7/8"
Batt Term Covers 5/8 in PVC
Battery Terminal Covers (SeaDog)
- Injection Molded PVC
- Cable Gauge : 1/0, 2/0
- Colors : Red/Black
- Satisfies USCG requirements and American Boat and Yacht Council recommendations for prevention of accidental grounding of battery terminals
- Will Fit most marine batteries as well as automotive batteries using add on marine terminals
- A - 5/8"
- B - 1-5/8"
- C - 1-11/16"
- D - 2-7/8"
Red 4GA 18in Battery Cable
Switch-to-Starter Cable
- 4 Gauge
- Recommended for engine to ground connections
- Fits up to 3/8" stud
- Red
- 18" length
Blk 4Ga 18in Battery Cable
Switch-to-Starter Cable
- 4 Gauge
- Black
- Recommended for engine to ground connection
- Fits up to 3/8" stud
- 18" length
Red 4GA 24in Battery Cable
Switch-to-Starter Cable
- 4 Gauge
- Red
- Recommended for engine to ground connections
- Fits up to 3/8" stud
- 24" length
Blk 4GA 24in Battery Cable
Switch-to-Starter Cable
- 4 Gauge
- Black
- Recommended for engine to ground connection
- Fits up to 3/8" stud
- 24" length
Heat Shrink 3/16 x 48in Black
Primary Wire Heat Shrinkable Tubing
- 18-14 Gauge
- Black
- Expanded Diameter: 3/16"
- Shrunken Diameter: 1/8"
- Economical heat shrink ideal for general purpose applications
- Protects against corrosion
- Use to identify positive and negative
- Act as a strain relief and prevents abrasion
- Material: Ethylene Vinyl Acetate
- Shrink Ratio: 2:1
- Operating Temperature: -67 degrees F to +221 degrees F
Heat Shrink 3/16 x 48in Red
Primary Wire Heat Shrinkable Tubing
- Red
- 14-10 Gauge
- Expanded Diameter: 3/16"
- Shrunken Diameter: 1/8"
- Economical heat shrink ideal for general purpose applications
- Protects against corrosion
- Use to identify positive and negative
- Acts as strain relief and prevents abrasion
- Material: Ethylene Vinyl Acetate
- Shrink Ratio: 2:1
- Operating Temperature: -67 degrees F to + 221 degrees F
Heat Shrink 1/4 x 48in Red
Primary Wire Heat Shrinkable Tubing
- Red
- 14-10 Gauge
- Expanded Diameter: 1/4"
-Shrunken Diameter: 3/16"
- Economical heat shrink ideal for general purpose applications
- Protects against corrosion
- Use to identify positive and negative
- Acts as a strain relief and prevents abrasion
- Material: Ethylene Vinyl Acetate
- Shrink Ration: 2:1
- Operating Temperature: -67 degrees F to +221 degrees F
Heat Shrink 1/4 x 48in Black
Primary Wire Heat Shrinkable Tubing
- Black
- 14-10 Gauge
- Expanded Diameter: 1/4"
- Shrunk Diameter: 3/16"
- Economical heat shrink ideal for general purpose applications
- Protects against corrosion
- Use to identify positive and negative
- Acts as strain relief and prevents abrasion
- Material: Ethylene Vinyl Acetate
- Operating Temperature: -67 degree F to +221 degree F
Black 4GA 32in Battery Cable
Switch-to-Starter Cable
- 4 Gauge
- Black
- Recommended for engine to ground connection
- Fits up to 3/8" stud
- 32" length
Red 2 GA 18in Battery Cable
Switch-to-Starter Cable
- 2 Gauge
- Red
- Recommended for engine to ground connection
- Fits up to 3/8" stud
- 18" length
Black 2 GA 18in Battery Cable
Switch-to-Starter Cable
- 2 Gauge
- Black
- Recommended for engine to ground connection
- Fits up to 3/8" stud
- 18" length
Red 4GA 40in Battery Cable
Switch-to-Starter Cable
- 4 Gauge
- Red
- Recommended for engine to ground connection
- Fits up to 3/8" stud
- 40" length
Black 4GA 40in Battery Cable
Switch-to-Start Cable
- 4 Gauge
- Black
- Recommended for engine to ground connection
- Fits up to 3/8" stud
- 40" length
Red 2 GA 16in Battery Cable
Switch-to-Starter Cable
- 2 Gauge
- Red
- Recommended for engine to ground connection
- Fits up to 3/8" stud
- 16" length
Black 2 GA 16in Battery Cable
Switch-to-Starter Cable
- 2 Gauge
- Black
- Recommended for engine to ground connection
- Fits up to 3/8" stud
- 16" length
Red 2 GA 24in Battery Cable
Switch-to-Starter Cable
- 2 Gauge
- Red
- Recommended for engine to ground connection
- Fits up to 3/8" stud
- 24" length
Black 2 GA 24in Battery Cable
Switch-to-Starter Cable
- 2 Gauge
- Black
- Recommended for engine to ground connection
- Fits up to 3/8" stud
- 24" length
Red 4GA 49in Battery Cable
Switch-to-Starter Cable
- 4 Gauge
- Red
- Recommended for engine to ground connection
- Fits up to 3/8" stud
- 49" length
Black 4GA 49in Battery Cable
Switch-to-Starter Cable
- 4 Gauge
- Black
- Recommended for engine to ground connection
- Fits up to 3/8" stud
- 49" length
Heat Shrink 1/2 x 48in Red
Battery Cable Heat Shrinkable Tubing
- Red
- 8-2 Gauge
- Expanded Diameter: 1/2"
- Shrunken Diameter: 1/4"
- Economical heat shrink ideal for general purpose applications
- Protects against corrosion
- Use to identify positive and negative
- Acts as a strain relief and prevents abrasion
- Sealant free single wall construction
- Conforms to DOD Mil-I-23053/6 Class 1 and 2
- Meets UL-224 125 degrees Celsius specifications
- Material: Polyolefin
- Shrink Ratio: 2:1
- Wall thickness after shrinking: 1/32"
- Operating Temperature: -67 degrees F to +275 degrees F
Heat Shrink 1/2 x 48in Black
Battery Cable Heat Shrinkable Tubing
- Black
- 8-2 Gauge
- Expanded Diameter: 1/2"
- Shrunken Diameter: 1/4"
- Economical head shrink ideal for general purpose applications
- Protects against corrosion
- Use to identify positive and negative
- Acts as a strain relief and prevents abrasion
- Sealant free single wall construction
- Conforms to DOD Mil-I-23053/6 Class 1 and 2
- Meets UL-224 125 degrees Celsius specifications
- Material: Polyolefin
- Shrink Ratio: 2:1
- Wall thickness after shrinking: 1/32"
- Operating temperature: -67 degrees F to +275 degrees F