Boot For Rocker Switch
Boot for Rocker Switch (SeaDog)
- Rubber
- Fits Sea-Dog part numbers 420441-1, 420443-1 and 420446-1.
- A: 1-3/8"
- B: 3/4"
- C: 3/8"
Switch Panel Label Kit
Switch Panel Label Kit (Marpac)
- Fits all Marpac switch panels
- Includes:
Accessory, Aerator, Anchor Light, Bait Pump, Baitwell, Bilge Pump, Bilge Pump Aft,
Bilge Pump Fwd, Cabin Lights, Deck Lights, Fish Finder, Flood Lights, GPS, Nav Lights, Running Lights, Spreader Lights, VHF, Wash Down, Water Pressure, Wipers
Toggle Switch Boot
Toggle Switch Boot (SeaSense)
- Dimensions: 3/4" x 1"
- Fits standard toggle switches with a 7/16" thread
- Protects against moisture and dirt
- Brass threads resist corrosion
Rocker Switch On/Off
2-Position On/Off Rocker Switch (SeaSense)
- Black matte finish
- Plastic
- 12 Volts
- Standard female disconnect wire terminals
OFF/MOM/ON Toggle Switch
Toggle Switch (SeaSense)
- OFF/MOM/ON switch
- Black plastic toggle, with lock-nut and knurled cap nut
- Ideal for starter and horn
- Depth behind panel 1"
- Requires 1/2" installation hole
- 15 amp MAX
- 12 Volt
- Reinforced corners prevent cracking from screw holes
- Technical Specifications:
- A: 1/2"
- B: 7/16"
- C: 1-1/4"
- D: 1-3/8"
ON/OFF Toggle Switch
Toggle Switch (SeaSense)
- On/Off switch
- Black plastic
- Lock-nut and knurled cap nut
- On/off for lights, blowers and aerators
- Depth behind panel 1"
- Requires 1/2" installation hole
- 15 amp MAX
- 12 Volt
- Reinforced corners prevent cracking from screw holes
- Technical Specification:
- A: 1/2"
- B: 1/2"
- C: 1-1/16"
- D: 1-1/8"
Long Toggle Switch- On/Off
Toggle Switch (SeaDog)
- Stamped Brass/Molded Bakelite
- 15 Amp
- 12 Volt
- Circuit: SPST
- Action: On/Off
- A: 7/16"
- B: 7/16"
Rocker Switch for Panels
Rocker Switch (SeaDog)
- Stamped Brass/Injection Molded Nylon/Polycarbonate
- 15 Amp
- 12 Volt
- Circuit: SPST
- Action: On/Off
- Illuminating
- A: 1/2"
- B: 1-1/8"
Replacment Switch for Panels Ill
Rocker Switch (SeaDog)
- Stamped Brass/Injection Molded Nylon + Polycarbonate
- 15 Amp
- 12 Volt
- Circuit: SPST
- Action: On/Off
- Illuminating
- A: 1/2"
- B: 1-1/8"
ON/OFF/ON Toggle Switch
Toggle Switch (SeaSense)
- ON/OFF/ON switch
- Black plastic, with lock-nut and knurled cap nut
- For running lights and anchor lights separately
- Depth behind panel 1"
- Requires 1/2" installation hole
- 15 amp MAX
- 12 Volt
- Reinforced corners prevent cracking from screw holes
- Technical Specifications:
- A: 1/2"
- B: 1/2"
- C: 1"
- D: 1-1/8"
ON/OFF/ON Rocker Switch
Rocker Switch (SeaSense)
- ON/OFF/ON switch
- Allows for a low profile look in a black matte finish plastic housing
- Uses standard female disconnect wire terminals
- Snap mounts in a 13/16" x 1-7/16" hole
- Technical Specifications:
- A: 1-9/16"
- B: 1-7/16"
- C: 1"
- D: 1-3/4"
Toggle Switch Mom-On/Off
Toggle Switch (SeaDog)
- Circuit: SPST
- Action: Momentary On/Off
- Terminals: 2 Blades
- Volts: 12
- Amps: 15
- Stamped Brass/Injection Molded Nylon/Polycarbonate
- A: 3/8"
- B: 1/2"
ON/OFF/ON Illuminated Toggle Switch
Illuminated Toggle Switch (SeaSense)
- ON/OFF/ON switch
- The perfect switch for any place a visual reference is helpful
- Complete with locking ring and cap nut
- 3-way switch illuminates Red(on)/ White(off)/ Green(on)
- Requires 1/2" installation hole
- 15 amp MAX
- 12 Volt
- Technical Specifications:
- A: 7/16"
- B: 7/16"
- C: 1-1/4"
- D: 1-3/8"
Brass Toggle Switch (2 Positions)
Brass Toggle Switch (SeaSense)
- ON/OFF switch
- Chrome plated brass handle, stem and face nut with clearly marked on/off positions
- Two screw terminals for easy installation
- Requires 1/2" installation hole
SWTCH CNTRA TYPE ON-OFF
Euro Style Rocker Switch
- Non-illuminated
- Black Plastic
- Rated: 16 amps at 12V DC.
- Fits Contura cut-out.
- 2-Position SPST
- On-Off
- Requires 27-32"x 1-15/32" rectangular cut-out
Rocker Switch On/Off
Large Rocker Switch (SeaDog)
- Stamped Brass/Injection Molded Nylon/Polycarbonate
- Circuit: SPST
- Action: ON/OFF
- Terminals: 2 Blades
- Amps: 15
- Volts: 12
- A: 7/8"
- B: 1-7/16"
On-Off Illu Toggle
Illuminating Toggle Switch (SeaDog)
- Stamped Brass/Injection Molded Nylon/Polycarbonate
- Circuit: SPST
- Action: Off/On
- Terminals: 3 Blades
- Volts: 12
- Amps: 15
- A: 3/8"
- B: 1/2"
Toggle Switch MOM On-Off
Euro-Style Rocker Switch
- Non-illuminated
- Black Plastic
- Rated: 16 amps at 12V DC.
- Fits Contura cut-out.
- 2-Position SPST
- Off-Momentary On
- Requires 27-32"x 1-15/32" rectangular cut-out
ON/OFF Illuminated Toggle Switch
Illuminated Toggle Switch (SeaSense)
- ON/OFF switch
- The perfect switch for any place a visual reference is helpful
- Complete with locking ring and cap nut
- Requires 1/2" installation hole
- 15 amp MAX
- 12 Volt
- Technical Specifications:
- A: 7/16"
- B: 7/16"
- C: 1-1/4"
- D: 1-3/8"
SWTCH CNTRA TYPE O-OFF-O
Euro-Style Rocker Switch
- Non-illuminated
- Black Plastic
- Rated: 16 amps at 12V DC.
- Fits Contura cut-out.
- 3 Position SPDT
- On-Off-On
- Requires a 27-32"x 1-15/32" rectangular cut-out
Switch Ilum On-Off
Euro-Style Rocker Switch
- Illuminated
- Glows white when on, can be seen in daylight.
- Black Plastic
- Rated: 16 amps at 12V DC.
- Fits Contura cut-out.
- 2-Position SPST
- On-Off
SWTCH CNTRA TYPE O-OFF-O
Euro-Style Rocker Switch
- Non-illuminated
- Black Plastic
- Rated: 16 amps at 12V DC.
- Fits Contura cut-out.
- 3 Position DPDT
- On-Off-On
- Requires a 27-32"x 1-15/32" rectangular cut-out
Switch Mom On-Off-Mom On
Euro-Style Rocker Switch
- Non-illuminated
- Black Plastic
- Rated: 16 amps at 12V DC.
- Fits Contura cut-out.
- 3 Position SPDT
- Momentary On-Off-Momentary On
- Requires a 27-32"x 1-15/32" rectangular cut-out