Home > Pumps & Plumbing > Marine Plumbing
Choose a sub category:
Livewell Accessories Marine Hose & Hose Clamps Thru Hulls
Livewells

Shurflo Connect. 1/2Barbx1/2NPT Bilge Pump 3/4" Thru-Hull Fitting Teflon Tape Thread seal 1/2x520
Adapter (Shurflo)
- Straight Fitting
- Fitting Size: 1/2" -14 Male NPT x 1/2" Barb
Bilge Pump
- 3/4" Thru-Hull Fitting
- White
- High impact, corrosion proof nylon
- For use above waterline only
Marpac Teflon Tape
- 1/2"x 50'

Shurflo Swivel Nut 1/2X3/4 Barb Elbow Swivel Nut 1/2X34 Barb Straight Bilge Pump 1-1/8" Thru-Hull Fitting
Elbow Pump Fitting (Shurflo)
- Wing Nut Swivel
- Nylon 1/2" - 14 NPT Female
- 3/8" Barb/Elbow
- Hand tighten only
Bilge Pump
- 1-1/8" Thru-Hull Fitting
- White
- High impact, corrosion proof nylon
- For use above waterline only
Strght .75x.75 NPT Hose Adapt. 1-1/4" Brass Snap Drain Plug O-Ring
O-Ring
Our Price: $6.77
Pipe-to-Hose Adapter (Marine Hardware)
- Angle: Straight
- Pipe Size: 3/4" NPT
- Hose Barb O.D.: 3/4"
- Hex Size: 1-1/4"
- Cast red brass
- Tapered pipe threads
- Constructed of bronze, these fittings are CNC machined to class 3 fits, ensuring leak-free joints
- All units are precision turned on hose end to ensure snug hose fits
- All parts are bulk-packed
Snap Drain Plug
- 1-1/4"
- Brass
- Simply snaps in the drain tube for a secure fit
- Made of corrosion resistant brass
O-Ring Gasket (Sherwood)
- Fits: 1", 1-1/4" & 1-1/2" Sea Strainers
Garboard Drain Plug Kit 90 Degree .50 NPT x .38 Hose Adapter Straight .75x1.00 NPT Hose Adapter
Garboard Drain Plug Kit
Our Price: $6.95
Garboard Drain Plug Kit
- Brass
- Threaded
- Includes female drain plug receptacle and standard brass plug
- 1/2" NPT
Pipe-to-Hose Adapter (Marine Hardware)
- Angle: 90 Degrees
- Male
- Pipe Size NPT: 1/2"
- Hose Size: .38"
- Cast red brass
- Tapered pipe threads
- These fittings are computer machined to a class 3 fit, ensuring leak-free joints.

- Precision turned on hose end to ensure snug hose fit
- All parts are bulk-packed
Pipe-to-Hose Adapter (Marine Hardware)
- Angle: Straight
- Pipe Size: 3/4" NPT
- Hose Barb O.D.: 1"
- Hex Size: 1-3/8"
- Cast red brass
- Tapered pipe threads
- Constructed of bronze, these fittings are CNC machined to class 3 fits, ensuring leak-free joints
- All units are precision turned on hose end to ensure snug hose fits
- All parts are bulk-packed
Strght 1.00x1.25 NPT Hose Adapt. Brass 2in NPT Pipe Nipple, No He Strght 1.00x1.00 NPT Hose Adapt.
Pipe-to-Hose Adapter (Marine Hardware)
- Angle: Straight
- Pipe Size: 1" NPT
- Hose Barb O.D.: 1-1/4"
- Hex Size: 1-1/2"
- Cast red brass
- Tapered pipe threads
- Constructed of bronze, these fittings are CNC machined to class 3 fits, ensuring leak-free joints
- All units are precision turned on hose end to ensure snug hose fits
- All parts are bulk-packed
Pipe Nipple w/out Hex (Marine Hardware)
- Bronze
- 2" NPT
- No hex
- Only source for pipe nipples in bronze whit is resistant to work hardening and is less likely to become brittle or crack when subjected to vibration
- The corrosion resistance and alloy compatibility makes them ideally suited for use with other bronze fittings such as ball valves, sea strainers and seacocks
Pipe-to-Hose Adapter (Marine Hardware)
- Angle: Straight
- Pipe Size: 1" NPT
- Hose Barb O.D.: 1"
- Hex Size: 1-1/2"
- Cast red brass
- Tapered pipe threads
- Constructed of bronze, these fittings are CNC machined to class 3 fits, ensuring leak-free joints
- All unites are precision turned on hose end to ensure snug hose fits
- All parts are bulk-packed

O-Rings Strght 1.25x1.25 NPT Hose Adapt 1/2in Brz Ext. Length ThruHull
O-Rings
Our Price: $7.95
O-Ring Gasket (Sherwood)
- Fits: 1/2" & 3/4" Sea Strainers

Pipe-to-Hose Adapter (Marine Hardware)
- Angle: Straight
- Pipe Size: 1-1/4" NPT
- Hose Barb O.D.: 1-1/4"
- Hex Size: 2"
- Cast red brass
- Tapered pipe threads
- Constructed of bronze, these fittings are CNC machined to class 3 fits, ensuring leak-free joints
- All units are precision turned on hose end to ensure snug hose fits
- All parts are bulk-packed
Thru-Hull (Marine Hardware)
- Standard Mushroom
- Machine finished bronze
- A - Size (NPSM): 1/2"
- B - Flange O.D.: 1-3/4"
- C - Neck Length: 2-1/4""
- Features:
  • Cast red bronze/naval bronze (the most corrosion resistant copper alloy available)
  • Cast with very sturdy wall thickness and machined with straight pipe thread, which blends into tapered pipe thread at the end of the neck
  • Thread configuration mates with virtually any piping or valve without the need for adapter connections
  • Generous neck lengths, threaded close to the flanges, fits any hull thickness
  • Machined sealant groove on back of flange face to prevent leakage
  • Complete with flanged jam nut
- Note: It's required to have cathodic bonding system to ensure proper service of all plumbing components

Strght 1.50x1.50 NPT Hose Adapt. 1/2in NPSM, 5/8in Barb Brz ThruHull 1-1/4in NPT to 1-1/2in Hose - St
Pipe-to-Hose Adapter (Marine Hardware)
- Angle: Straight
- Pipe Size: 1-1/2" NPT
- Hose Barb O.D.: 1-1/2"
- Cast red brass
- Tapered pipe threads
- Constructed of bronze, these fittings are CNC machined to class 3 fits, ensuring leak-free joints
- All unites are precision turned on to hose end to ensure snug hose fits
- All parts are bulk-packed
Thru-Hull (Marine Hardware)
- Barbed Mushroom
- Machine finished bronze
- Size (NPSM): 1/2"
- Fits Hose Dia.: 1/2"
- A - Flange Size: 1-1/2"
- B - Neck Length: 1-1/2"
- C - Barb Length: 1-1/4"
- Designed for use above the waterline, attached directly to hose
- The bodies have straight thread below the barbed section
- Has heavy wall construction for strength and wrench flats on the end of the threaded portion for easy, one-person installation
Pipe-to-Hose Adapter (Marine Hardware)
- Angle: Straight
- Pipe Size: 1-1/4" NPT
- Hose Barb O.D.: 1-1/2"
- Cast red brass
- Tapered pipe threads
- Constructed of bronze, these fittings are CNC machined to class 3 fits, ensuring leak-free joints
- All units are precision turned on hose end to ensure snug hose fits
- All parts are bulk-packed
Flapper SCPR Repair Kit 90-0.75x0.75   90 Degree 0.75in 3.4in Brz Mushrm ThruHull Mach F
Flapper SCPR Repair Kit
Our Price: $11.95
Flapper Scupper Repair Kit
- Repairs most scuppers.
- Kit contains: (2) each 1", 1.5" & 2" flappers, keepers & stainless fasteners.
Pipe-to-Hose Adapter (Marine Hardware)
- Angle: 90 Degrees
- Male
- Pipe Size: 3/4" NPT
- Hose Size: 3/4"
- Cast red brass
- Tapered pipe threads
- Constructed of bronze, these fittings are CNC machined to class 3 fits, ensuring leak-free joints
- All units are precision turned on hose end to ensure snug hose fits
- All parts are bulk-packed
Thru-Hull (Marine Hardware)
- Standard Mushroom
- Machine finished bronze
- A - Size (NPSM): 3/4"
- B - Flange O.D.: 1-3/4"
- C - Neck Length: 2-1/4"
- Features:
  • Cast of red bronze/naval bronze (the most corrosion resistant copper alloy available)
  • Cast with very sturdy wall thickness and machined with straight pipe thread, which blends into tapered pipe thread at the end of the neck
  • Thread configuration mates with virtually any piping or valve without the need for adapter connections
  • Generous neck lengths, threaded close to the flanges, fit any hull thickness
  • Machined sealant groove on back of flange fave to prevent leakage
  • Complete with flanged jam nut
- Note: It's required to have cathodic bonding system to ensure proper service of all plumbing components

90-1.00x1.00   90 Degree 1in NPT 3/4in Brz Barb. ThurHull w/Nut 3/4in Brz Ext. Length ThruHull
Pipe-to-Hose Adapter (Marine Hardware)
- Angle: 90 Degrees
- Male
- Pipe Size: 1" NPT
- Hose Size: 1"
- Cast red brass
- Tapered pipe threads
- Constrcuted of bronze, these fitings are CNC machined to class 3 fits, ensuring leak-free joints
- All units are precision turned on hose end to ensure snug hose fits
- All parts are bulk-packed

Thru-Hull (Marine Hardware)
- Barbed Mushroom
- Machine finished bronze
- Size (NPSM): 3/4"
- Fits Hose Dia.: 3/4"
- A - Flange Size: 1-3/4"
- B - Neck Length: 2"
- C - Barb Length: 1-1/2"
- Designed for use above the waterline, attached directly to hose
- The bodies have straight thread below the barbed section
- Has heavy wall construction for strength and wrench flats on the end of the threaded portion for easy, one-person installation

Thru-Hull (Marine Hardware)
- Extended Mushroom
- Machine finished bronze
- A - Size (NPSM): 3/4"
- B - Flange O.D.: 1-3/4"
- C - Neck Length: 4"
- Features:
  • Cast of red bronze/naval bronze (the most corrosion resistant copper alloy available)
  • Cast with very sturdy wall thickness and machined with straight pipe thread, which blends into tapered pipe thread at the end of the neck
  • Thread configuration mates with virtually any piping or valve without the need for adapter connections
  • Generous neck lengths, threaded close to the flanges, fit any hull thickness
  • Machined sealant groove on back of flange face to prevent leakage
  • Complete with flanged jam nut
- Note: It's required to have cathodic bonding system to ensure proper service of all plumbing components

EZ PUMP-LONG-BLACK Ball Valve 1/2 Full Flow Marine Hardware Screen Replacement 20M
EZ PUMP-LONG-BLACK
Our Price: $18.95
Screen Replacement 20M
Our Price: $19.67
EZ PumpTM Advanced Water Pick-Up System
- Provides Water to Aerator Pump Pickup While Underway This unique Patented item from T-H Marine solves the problem of providing water to the aerator pump and livewells while on plane and underway.
- Simply remove the screen and nut from the pump intake on the outside of the transom and install the slide plate over the tube.
- Replace the nut and slide the mount even with the bottom of the transom.
- Install the EZ PumpTM housing over the mount.
- EZ PumpTM scoops water and maintains a source of supply to the aerator pump.
- Simple yet effective.
Ball Valve (Marine Hardware)
- Pipe Size: 1/2"
- Length: 1-7/8"
- Handle: 3-3/16"
- Ground screw, Full Port
-
Housing cast of heavy-duty 85-5-5-5 naval bronze; machined with tapered pipe threads (NPT)

- Chromed bronze ball for maximum saltwater corrosion resistance; SS ball stem
- Grounding screw for connection to the boat's bonding system, (sizes 1/2" to 4")
- Drain plug for easy winterizing (sizes 3/4" to 4")
- Handles are coated with a thick, non-slip plastic for a sure grip
- Bronze body/SS hardware - cathodic protection is required; includes grounding screw for connection to the boat's bonding system

Replacement Part for Sea Strainer (Sherwood)
- Screen 20 Mesh SS
- Sea Strainer Size - 1"

NEED HELP FILL OUT OUR -> PARTS REQUEST FORM