Home > Maintenance > Fuel & Motor Accessories
Choose a sub category:
Fuel Hose Fuel Filters Fuel Sender

Cast SS Deck Plate Key 2AR FORM-A-GSKT, 1.5OZ 3/8" Honda Hose Fittings / Fuel Connector (22-13563a3)
Cast SS Deck Plate Key
Our Price: $4.49
2AR FORM-A-GSKT, 1.5OZ
Our Price: $4.60
Deck Fill Key (SeaDog)
- Investment Cast 316 Stainless
- Fits all Cast Stainless Steel Sea-Dog Deck Fill Caps: Part Numbers 351320-351331 and 351350-351353

Form-A-Gasket No. 2 Sealant (Permatex)
- 1.5 oz
- Black
- Cure Time: 24 hrs
- Slow drying, non-hardening sealant designed for sealing cut gaskets and stamped parts
- Allows for easy disassembly if requried
- Temp Range: -65 degrees F to 400 degrees F
- Resists common shop fluids and fuels
- Use where sealing is more important than adhesion
- Suggested Application: Valve cover gaskets, oil pan gaskets
Tank/Hose Fuel Fittings (SeaSense)
- Mercury
- O.E.M. - 22-13563A3
- Female 2 prong clip style tank connector
- 3/8" barb connectors
- Resin
3/8" Mercury Hose Fitting / Fuel Fitting (22-13563a7) 1/4" Nissan / Tohatsu Tank Fitting / Fuel Connector 3/8" Yamaha Hose Fitting / Fuel Connector (6E5-24305-05 / 6Y2-24305-05)
Tank/Hose Fuel Fitting (SeaSense)
- Mercury
- O.E.M. - 22-13563A7
- 3/8" barb
- Resin
- 1998 & later
- Female 2 prong slip style fuel & tank connector
Tank/Hose Fuel Fitting (SeaSense)
- Tohatsu / Nissan
- Male 1/4" NPT
- Chrome plated brass 2.5-90 hp
- Male tank connector
Tank/Hose Fuel Fitting (SeaSense)
- Yamaha
- O.E.M. - 6E5-24305-05 / 6Y2-24305-05
- 3/8" barb
- Resin
- Female fuel line connector

MAL-9-38015-Johnson/Evinrude Qui Universal Motor Flusher 1/4" Nissan / Tohatsu Tank Fitting / Fuel Connector
Universal Motor Flusher
Our Price: $5.49
Tank/Hose Fuel Fitting (SeaSense)
- OMC /Johnson / Evinrude
- O.E.M. - 176445
- 3/8" barb
- Resin
- Female fuel line connector
Motor Flusher (SeaSense)
- Universal
- Round
- A garden hose can be used to flush the cooling system out
- Works on most outboards and inboard/outbaords
- Also a great way to test run your boat before heading for the water
- Increases the life of all outboard engines
- Cups rotate for easy application
- Soft, rubber cups for proper circulation and also prevents scratching
Tank/Hose Fuel Fitting (SeaSense)
- Tohatsu / Nissan
- Male 1/4" NPT
- Chrome plated
- Male tank connector
Bulkhead Fitting - 3/8" 1/4" Honda Tank Fitting / Fuel Connector Universal Motor Flusher (Large)
Bulkhead Fitting - 3/8"
Our Price: $5.69
Bulkhead Brass Fitting (SeaSense)
- Straight
- 3/8" barb on each end
- Accommodates up to 1/2" think bulkhead
- Requires 5/8" diameter hole for installation


Tank/Hose Fuel Fittings (SeaSense)
- Honda
- 1/4" NPT
- Brass
- Male 2 prong clip style tank connector
Motor Flusher (Marpac)
- Universal
- Rectangular
- Can use a garden hose to flush the cooling system out
- Works on most outboards and inboard/outboards
- Also a great way to test run your boat before heading for the water
- Increases the life of all outboard engines
- Cups rotate for easy application
- Soft, rubber cups aid in proper circulation and prevention of scratching
3/8" OMC/Johnson/Evinrude Hose Fitting / Fuel Connector (176445) 1/4" Mercury Tank Fitting / Fuel Fitting (99105-00193) 1/4" Yamaha Tank Fitting / Fuel Connector
Tank/Hose Fuel Fitting (SeaSense)
- OMC / Johnson / Evinrude
- O.E.M. - 502867/ 772681
- Male 1/4" NPT
- Brass
- Male tank connector
Tank/Hose Fuel Fittings (SeaSense)
- Mercury
- O.E.M. - 99105-00193
- 1/4" NPT
- Brass
- Male 2 prong clip style tank connector
Tank/Hose Fuel Fitting (SeaSense)
- Yamaha
- O.E.M. - 30185A3
- Male 1/4" NPT
- Brass N/A
- Male tank connector
1/4" Honda Tank Fitting / Fuel Connector (99105-00193) 3/8" Chrysler/Force Hose Fitting / Fuel Connector (197787-3) 3/8" Nissan / Tohatsu Hose Fitting / Fuel Connector
Tank/Hose Fuel Fitting (SeaSense)
- Suzuki
- O.E.M.- 99105-00193
- Male 1/4" NPT
- Chrome plated brass
- Male tank connector

Tank/Hose Fuel Fitting (SeaSense)
- Chrysler / Force
- O.E.M. - 197787-3
- 3/8" barb
- Chrome plated brass
- Female fuel line connector
Tank/Hose Fuel Fitting (SeaSense)
- Tohatsu / Nissan
- 3/8" barb
- Chrome plated brass 2.5-90 hp
- Female fuel line connector
Starter Handle & Rope 3H AVITN FORM-A-GSKT 4OZ Nissan / Tohatsu Hose Fitting / Fuel Connector
Starter Handle & Rope
Our Price: $9.59
Starter Handle & Rope (Sierra)
- Rope: #4.5 (9/64")
- Handle Only: 18-4901
Aviaton Form-A-Gasket No. 3 Sealant (Permatex)
- 4 oz.
- Slow drying, non-hardening brush top sealant
- Resists gasoline, oil and grease
- Approved in aviation as well as automotive applications
- Temperature Range: -65 degrees F to 400 degrees F
- Holds gaskets in place while making assembly.
- Brush on formula that dries slowly to a pliable film for easy disassembly.
- Suggested Applications: Close-fitting machined surfaces, sealing hoses and solid gaskets
Tank/Hose Fuel Fitting (SeaSense)
- Tohatsu / Nissan
- 3/8" barb
- Female fuel line connector
- Chrome plated brass
3/8" Suzuki Hose Fitting / Fuel Connector (65750-95510) In Line Fuel Filter Kit 1/4" Mercury/Mariner Hose Fitting / Fuel Connector
In Line Fuel Filter Kit
Our Price: $10.99
Tank/Hose Fuel Fitting (SeaSense)
- Suzuki
- O.E.M. - 65750-95510
- 3/8" barb
- Chrome plated brass
- Female fuel line connector
In Line Fuel Filter Kit (Marpac)
- Superior filtering
- Transparent Housing
- For portable fuel systems only
- Fits all boats, cars, and trucks using carbureted fuel systems
- Replaces any 1/4", 5/16", and 3/8" inline filter

Tank/Hose Fuel Fitting (SeaSense)
- Mercury
- O.E.M. - N/A
- 1/4" NPT
- 3/8" barb connectors
- Die cast aluminum
- 3 Piece female tank connector
Silicone 3oz Ultra Copper Anti-Seize, Brsh Top 8oz Ez-Pour Repl Spout Kit
Silicone 3oz Ultra Copper
Our Price: $11.45
Anti-Seize, Brsh Top 8oz
Our Price: $11.99
Ez-Pour Repl Spout Kit
Our Price: $12.31
Ultra Copper® Hi-Temp RTV Silicone Gasket Maker (Permtrex)
- 3 oz
- For 4-cylinder, turbocharged or high performance engines.
- Sensors safe, low odor, non-corrosive.
- Superior adhesion.
- Temperature Range -75° F-700° F.
- Perfect for exhaust manifolds/headers, valve covers, oil pan, timing covers, water pumps, thermostat housings.
Anti-Seize Lubricant (Permatex)
- 8 oz
- Brush-top
- A high refined blend of aluminum copper and graphite lubricants.
- Use during assembly to prevent galling, corrosion and seizing and to assure easier disassembly. - Temperature range: -60°F to 1600°F. Salt, corrosion and moisture resistant, ideal for marine use.
- Suggested Marine Application: For easy removal of spark plugs, cylinder head and exhaust head bolts
Replacement Spout Kit (EZ-Pour)
- Two Cap Replacements
-
1/2'' Replacement Push in Vent
-
Mesh Flame Arrestor Equalizes Pressure when Adding or Removing Contents
-
This product makes those hard to use carrying gas tanks easy to use!


Sender Gasket SecureStack Tie Down Kit Ez-Pour Replacement Spout Kit
Sender Gasket
Our Price: $12.99
SecureStack Tie Down Kit
Our Price: $14.49
Sender Gasket (Moeller Marine)
- For electric and mechanical sending units
- Screws included
- Fuel rated rubber
SecureStack Tie Down Kit (SeaSense)
- Includes:

- (2) 68" Nylon Strips
- (4) SS Strap Tie Downs
- (8) SS Mounting Screws
Gas Can Spout Kit (EZ-Pour)
- The unique EZ-POUR Hi-Flo replacement spout allows you to bring your old trusty gas cans back to life and better than ever!
- The EZ-POUR Hi-Flo is specifically designed for gas cans manufactured before January 1st, 2009.
- The Hi-Flo spout is incredibly effective and can empty a five gallon vented can in 35 seconds.
- Set Includes:
- 2 Base Caps With Different Threads
- 1/2" Replacement Push In Vent
- 8" Spout
- 8" Spout Extension.
- The spout extension allows for you to extend eight inches to make your life easier.
- Due to (CARB) California Air Resources Board regulations, this product is banned for sale in the following states: CA, CT, DC, DE, MA, ME, MD, NH, NJ, NY, OH, and VA.
- The easy flow action and superior manufacturing means your spout won't break down or spill.
NEED HELP FILL OUT OUR -> PARTS REQUEST FORM