Home > Electrical > Breakers, Switches, Plugs, Wire, ETC
Choose a sub category:
Accessory Plugs Battery Cables Battery Switches
Breakers, Buss Bars and Terminal Blocks Cable Ties Electrical Connectors
Fuses and Fuse Holders Ignition Switches Switch Panels
Switches Trolling Motor Wire
Battery Boxes

16/2 Red/Blk Wire Boot For Rocker Switch Toggle Switch Boot
16/2 Red/Blk Wire
Our Price: $0.59
Boot For Rocker Switch
Our Price: $1.95
Toggle Switch Boot
Our Price: $1.95
Tinned Wire/Cable (East Penn Deka)
- 100 Ft
- UL Listed 1426
- Stranding: 26/30
- Nominal OD: .205 x .328
- 16/2 Gauge
- UL Listed, multi-conductor tinned wire with white jacket is ideal for use in the high corrosive environment of marine applications.
- Special electro-tinned, copper strands also increase protection against corrosion for recreational vehicles, automotive, trucks, and trailers.
- Tinned copper stranding is extremely flexible for easy routing through marine applications and easier to solder than bare copper.
- Flame retardant, PVC insulation is highly resistant to water, oil, grease, gasoline, and other damaging solvents.
- High voltage tolerance of up to 600 volts adds to versatility to its use in multiple marine and other suitable applications.
- Voltage: Rated at 600 Volts
- Temperature: Rated at 105°C (221°F) dry and 75°C (167°F) wet
- Specifications: Meets DOT and Coast Guard specs for electrical systems


Boot for Rocker Switch (SeaDog)
- Rubber
- Fits Sea-Dog part numbers 420441-1, 420443-1 and 420446-1.
- A: 1-3/8"
- B: 3/4"
- C: 3/8"

Toggle Switch Boot (SeaSense)
- Dimensions: 3/4" x 1"
- Fits standard toggle switches with a 7/16" thread
- Protects against moisture and dirt
- Brass threads resist corrosion
ON/OFF Toggle Switch Brass Toggle Switch (2 Positions) Toggle Switch Boot
ON/OFF Toggle Switch
Our Price: $2.95
Toggle Switch Boot
Our Price: $3.65
Toggle Switch (SeaSense)
- On/Off switch
- Black plastic
- Lock-nut and knurled cap nut
- On/off for lights, blowers and aerators
- Depth behind panel 1"
- Requires 1/2" installation hole
- 15 amp MAX
- 12 Volt
- Reinforced corners prevent cracking from screw holes
- Technical Specification:
- A - 1/2"
- B - 1/2"
- C - 1-1/16"
- D - 1-1/8"


Brass Toggle Switch (SeaSense)
- ON/OFF switch
- Chrome plated brass handle, stem and face nut with clearly marked on/off positions
- Two screw terminals for easy installation
- Requires 1/2" installation hole

Toggle Switch Boot (Whitecap)
- Waterproof
- Fits standard switches with 15/32"-32 stem
OFF/MOM/ON Toggle Switch Power Plug W/Socket SD-426112 MOM/OFF/MOM Toggle Switch
Toggle Switch (SeaSense)
- OFF/MOM/ON switch
- Black plastic toggle, with lock-nut and knurled cap nut
- Ideal for starter and horn
- Depth behind panel 1"
- Requires 1/2" installation hole
- 15 amp MAX
- 12 Volt
- Reinforced corners prevent cracking from screw holes
- Technical Specifications:
- A - 1/2"
- B - 7/16"
- C - 1-1/4"
- D - 1-3/8"
Power Plug & Socket w/Cover (Shoreline Marine)
- Universal plug and socket for most 12 volt applications
- Weather resistant cover
- Push on wires
- Includes stainless mounting hardware and 10 Amp fuse
- Great kit for new installation of lights or switches
- UPC - 013893520821
Toggle Switch (SeaSense)
- MOM/OFF/MOM switch
- Black plastic toggle
- Lock-nut and knurled cap nut
- Ideal for starter and horn
- Depth behind panel 1"
- Requires 1/2" installation hole
- 15 amp MAX
- 12 volt
- Reinforced corners prevent cracking from screw holes
- Technical Specifications:
- A - 1/2"
- B - 7/16"
- C - 1-1/4"
- D - 1-3/8"

ON/OFF Illuminated Toggle Switch ON/OFF/ON Toggle Switch ON/OFF/ON Illuminated Toggle Switch
ON/OFF/ON Toggle Switch
Our Price: $4.45
Illuminated Toggle Switch (SeaSense)
- ON/OFF switch
- The perfect switch for any place a visual reference is helpful
- Complete with locking ring and cap nut
- Requires 1/2" installation hole
- 15 amp MAX
- 12 Volt
- Technical Specifications:
- A - 7/16"
- B - 7/16"
- C - 1-1/4"
- D - 1-3/8"


Toggle Switch (SeaSense)
- ON/OFF/ON switch
- Black plastic, with lock-nut and knurled cap nut
- For running lights and anchor lights separately
- Depth behind panel 1"
- Requires 1/2" installation hole
- 15 amp MAX
- 12 Volt
- Reinforced corners prevent cracking from screw holes
- Technical Specifications:
- A - 1/2"
- B - 1/2"
- C - 1"
- D - 1-1/8"
Illuminated Toggle Switch (SeaSense)
- ON/OFF/ON switch
- The perfect switch for any place a visual reference is helpful
- Complete with locking ring and cap nut
- 3-way switch illuminates Red(on)/ White(off)/ Green(on)
- Requires 1/2" installation hole
- 15 amp MAX
- 12 Volt
- Technical Specifications:
- A - 7/16"
- B - 7/16"
- C - 1-1/4"
- D - 1-3/8"

ON/OFF/ON Rocker Switch Trailer End Connector Trailer Connector
ON/OFF/ON Rocker Switch
Our Price: $4.95
Trailer End Connector
Our Price: $4.95
Trailer Connector
Our Price: $5.25
Rocker Switch (SeaSense)
- ON/OFF/ON switch
- Allows for a low profile look in a black matte finish plastic housing
- Uses standard female disconnect wire terminals
- Snap mounts in a 13/16" x 1-7/16" hole
- Technical Specifications:
- A - 1-9/16"
- B - 1-7/16"
- C - 1"
- D - 1-3/4"
4-Wire Trailer Wire Accessories (SeaDog)
- Injection Molded PVC
- Vehicle Plug 4-Pin 48"

4-Wire Trailer Wire Accessories (SeaDog)
- Injection Molded PVC
- Trailer Plug Kit (Male & Female) 12" & 48"

Switch, Toggle Circuit Breaker, Wht Pl 3 Amp Circuit Breaker, Blk Plunger
Switch, Toggle
Our Price: $6.36
Duckbill Toggle Switch (Sierra)
- On-Off SPST
- Glows Red in ON position
- Translucent Plastic Handle: 1"
- Non-corrosive plastic construction
- Brass blade terminals
- Mounting Hole: 1/2"
- Supplied with bezel nut and spacer ring
- 15 Amp rating @ 12 VDC
Push Button Resettable Circuit Breaker (Sierra)
- 3 Amp Rating
- White
- Replacement for popular panel mounted breakers
- Mounts in 3/8" hole
- White buttons for DC, black buttons for AC
- Use MP39210 for weatherproof boot nut

Push Button Resettable Circuit Breaker (Sierra)
- 10 Amp Rating
- Black
- Replacement for popular mounted breakers
- Mounts 3/8" hole
- White buttons for DC, black buttons for AC
- Use MP39210 for weatherproof boot nut
Circuit Breaker, Wht Plunger Circuit Breaker, Wht Plunger Circuit Breaker, Wht Plunger
Push Button Resettable Circuit Breaker (Sierra)
- 5 Amp Rating
- White
- Replacement for popular panel mounted breakers
- Mounts 3/8" hole
- White buttons for DC, black buttons for AC
- Use MP39210 for weatherproof boot nut
Push Button Resettable Circuit Breaker (Sierra)
- 15 Amp Rating
- White
- Replacement for popular panel mounted breakers
- Mounts in 3/8" hole
- White buttons for DC, black buttons for AC
- Use MP39210 for weatherproof boot nut
Push Button Resettable Circuit Breaker (Sierra)
- 20 Amp Rating
- White
- Replacement for popular panel mounted breakers
- Mounts 3/8" hole
- White buttons for DC, black buttons for AC
- Use MP39210 for weatherproof boot nut
Universal Kill Switch w/Coiled Lanyard Plug, Male Moter Side 24V Socker, Female Motor Side 24V
Plug, Male Moter Side 24V
Our Price: $11.55
Kill Switch (SeaSense)
- Length: 7-1/2"
- Universal
- Contains 7 keys to fit Johnson, Evinrude, Mercury, Yamaha, Suzuki, Tohatsu and Honda kill switches
- Swivel snap hook prevents tangling
- Corrosion resistant
- Tangle-free coiled lanyard

Trolling Motor Plugs (Sierra)
- Male Motor Side Trolling Motor Plug
- 24 Volt
- 6" - 10 Gauge w/butt connectors
- Use with WH10490-1
Trolling Motor Plug (Sierra)
- Female Motor Side Trolling Motor Socket
- 24 Volt
- 6" - 8 Gauge w/butt connectors
- Use with WH10540-1
Socket, Female Motor Side 24V Plug, Male Boat Side 24V 4 Gang 12 Volt Rocker Switch
Plug, Male Boat Side 24V
Our Price: $14.38
Trolling Motor Plug (Sierra)
- Female Boat Side Trolling Motor Socket
- 24 Volt
- 6" - 10 gauge w/butt connectors
- Use with WH10500-1
Trolling Motor Plugs (Sierra)
- Male Boat Side Trolling Motor Plug
- 24 Volt
- 6" - 8 Gauge w/butt connectors
- Use with WH10550-1

Rocker Switch Panel (SeaSense)
- 4 gang rocker switch
- 2-7/8" x 3-3/4" cut-out
- Comes complete with illuminated rocker switches, pop out fuse holders and marine grade tinned wire
- 12 volt
- Individual circuit 7 amps
- Fuses and extra labels included for different applications
- Corrosion free aluminum panel
90 amp fuse  88-79023A91 Warning Kit, Audible         M40 Circuit Breaker, Resettable 60A
90 amp fuse 88-79023A91
Our Price: $31.13
Warning Kit, Audible M40
Our Price: $31.17
Fuse Kit (Sierra)
O.E.M. - Mercury Marine
- Replaces: 88-79023A91
- For use with 18-5953 alternator conversion kits installed on Mercuiser ( Model 470) 3.7 liter aluminum block engines serial number 6902288 & Up.
- 90 AMP
Complete Audible Warning Kit (Sierra)
- Contains:

- OP229900 (Clamshell) Oil pressure switch 6 PSI (1/8" - 27) normal closed
- TS25101 Temperature switch (3/8" - 18)
- MC33502 Buzzer switch
- OP22891 Optional oil pressure switch 15 PSI (1/8" - 27) normal closed
- Buzzer alerts operator of high engine temperatures or low engine oil pressure.
- Kit includes instruction, oil pressure switch (set at 6 PSI) and temperature switch (set at 200 degrees F.)
High Amperage Circuit Breaker (Sierra)
- Perfect for rigging trolling motors, and other high amp electrical equipment
- Ignition Protected
- Waterproof
- Can be used as switch and circuit breaker
- Replaces Minnkota MKR-19
- 60 Amp Rating
- Maximum voltage 42 VDC
- Stainless steel hardware

NEED HELP FILL OUT OUR -> PARTS REQUEST FORM