|
|
|
|
|
|
|
|
|
|
|
Eye Straps (SeaSense) - 4 piece set - Length: 1-7/8" - White molded plastic - Inset holes for a flush mount - Technical Specifications: - A: 1-7/6" - B: 1-7/8" - C: 5/16" - D: 1/2"
|
Eye Straps (SeaSense) - 2 piece set - Length: 1-13/16" - Stainless steel - Inset holes for a flush mount - Technical Specifications: - A: 1-5/6" - B: 1-13/16" - C: 5/16" - D: 1/2"
|
Pad Eye (SeaDog) - Stamped 304 Stainless Steel - A: 3/4" - B: 3/4" - C: 1-3/4" - Fastener: #10 RH
|
|
|
|
|
|
|
|
|
|
|
|
|
Pad Eye (SeaDog) - Forged 304 Stainless - A: 1/2" - B: 7/16" - C: 1-9/16" - Fastener: #8 FH
|
Pad Eye (SeaDog) - Stamped 304 Stainless Steel - Packed in sets of 4 - A: 1/2" - B: 7/16" - C: 1-1/8" - Fastener: #8 RH
|
Pad Eye (SeaDog) - Die Cast Zinc Chrome Plated - Packed 5 each per set - A: 3/8" - B: 1/2" - C: 1-3/8" - Fastener: #8 FH
|
|
|
|
|
|
|
|
|
|
|
|
|
Pad Eye (SeaDog) - Forged Bronze Wire - Chrome Finish - A: 5/16" - B: 3/8" - C: 1-3/8" - Fastener: #10 FH
|
Pad Eye (SeaDog) - Forged 304 Stainless Steel - A: 5/16" - B: 3/8" - C: 1-3/8" - Fastener: #8 FH
|
Pad Eye (SeaDog) - Stamped 304 Stainless Steel - Packed in sets of 4 - A: 5/8" - B: 9/16" - C: 1-3/8" - Fastener: #10 RH
|
|
|
|
|
|
|
|
|
|
|
|
|
Tie Down Eye Strap (SeaDog) - Forged 304 Stainless Steel - A: 3/8" - B: 1-1/16" - C: 2-1/8" - D: 1/4" - Fastener: #10 FH
|
Pad Eye (SeaDog) - Forged 304 Stainless - A: 3/8" - B: 1/2" - C: 1-5/8" - Fastener: #10 FH
|
Bow Eye (SeaDog) - Die Cast Zinc Chrome Plated Head - Galvanized Shaft - A: 3/8" NC - B: 4-5/8" - C: 15/16" - D: 6-5/8" - E: 1-13/16" - B.S.: 2,500 lbs.
|
|
|
|
|
|
|
|
|
|
|
|
|
Eye Nut (SeaDog) - Investment Cast 316 Stainless Steel - Has NC threads - Designed to be screwed onto various lengths of threaded stock or bolts to accomodate verying transom thickness - A: 3/8" - 16 NC - B: 5/8" - C: 1-7/8" - D: 1" - E: 5/16"
|
Tie Down Eye Strap (SeaDog) - Forged 304 stainless. - A: 3/8" - B: 2" - C: 3-1/8" - D: 1/4" - Fastener: #10 FH
|
Eye Nut (SeaDog) - Investment Cast 316 Stainless Steel - Has NC threads - Designed to be screwed onto various lengths of threaded stock of bolts to accomodate varying transom thickness - A: 1/2" - 13 NC - B: 7/8" - C: 2-3/8" - D: 1-3/16" - E: 3/8"
|
|
|
|
|
|
|
|
|
|
|
|
|
Molded Clam Shell (Seachoice) - Large - White - Best Used to Route Wires, Cables and Many other things.
|
Lift Handle (SeaDog) - Sand Cast Chrome Plated Brass - Sold as Each Only - Fasteners: #10 Flat Head, Not Included - A: 4-3/4" - B: 2-5/8" - C: 13/16" - D: 1-1/4" - E: 5/8" - F: 4-1/16"
|
Bow Eye (SeaDog) - Machined 304 Stainless Steel - Comes with adjustable finish nuts as compared to the crimped ring used on most other bow eyes - Has rolled threads - Works with Lift Eye 048330 - Threads: 3/8" NC - A: 3/8" - B: 2-1/2" - C: 1-1/16" - D: 3-15/16" - E: 1-7/16" - B.S.: 16,000 lbs.
|
|
|
|
|
|
|
|
|
|
|
|
|
Bow Eye (SeaDog) - Machined 304 Stainless Steel - Comes with adjustable finish nuts as compared to the crimped ring used on most other bow eyes - Has rolled threads - Works with Lift Eye 048330 - Threads: 3/8" NC - A: 3/8" - B: 3-1/2" - C: 1-1/16" - D: 4-15/16" - E: 1-7/16" - B.S.: 16,000 lbs.
|
Stern Eye (SeaDog) - Machined 304 Stainless Steel - Comes with adjustable finish nuts as compared to the crimped ring used on most other stern eyes - Has rolled threads - Plate Size: (plate 1) 2-1/4" x 3/4", (plate 2) 2-3/4" x 1-1/4" - Thread: 3/8" NC - A: 3/8" - B: 3-1/2" - C: 1-1/16" - D: 4-15/16" - E: 1-7/16" - B.S.: 16,000 lbs.
|
Pole Holder (Whitecap) - 304 Stainless steel - Black Nylon - 4-3/4" x 2-1/2" - Cut Out: 1-3/16" x 3-1/2" - Fastener: 1/4" (4) - Flush Mount Full Ring
|
|
|
|
|
|
|
|
|
|
|
|
|
Pole Holder (Whitecap) - 304 Stainless steel - Black Nylon - 4-3/4" x 2-1/2" - Cut Out: 1-3/16" x 3-1/2" - Fastener: 1/4" (4) - Flush Mount Half Ring
|
U-Bolt (SeaDog) - Machined 304 Stainless Steel - Metric Threads - The outer mounting plate is held in place by crimped ears forged into the U-Bolt - Plate Size: 2" x 11/16" (both plates) - A: 8 mm - B: 1-3/8" - C: 1" - D: 2-3/4" - E: 1-5/16" - B.S.: 3,850 lbs.
|
Stern Eye (SeaDog) - Machined 304 Stainless Steel - Comes with adjustable finish nuts as compared to the crimped ring used on most other stern eyes - Has rolled threads - Plate Size: (plate 1) 2-1/4" x 3/4", (plate 2) 3-1/2" x 1-1/2" - Thread: 1/2" NC - A: 7/16" - B: 3-1/2" - C: 1-3/8" - D: 5-5/16" - E: 1-7/8" - B.S.: 25,000 lbs.
|
|
|
|
|
|
|
|
|
|
|
|
|
Folding Pole Storage Bracket (SeaDog) - Injection Molded Nylon/304 Stainless - Fastener: #12 FH - A: 1-1/4" - B: 1-3/4" - C: 1-3/16"
|
Bow Eye (SeaDog) - Machined 304 Stainless Steel - Comes with adjustable finish nuts as compared to the crimped ring used on most other bow eyes - Threads - 1/2" NC - A: 7/16" - B: 3-1/2" - C: 1-3/8" - D: 5-5/16" - E: 1-3/4" - B.S.: 25,000 lbs.
|
Ball & Socket Flat Deck Hinge (TACO) - 7/8" Flat - Fastener: #8 FH Screw - With pin and lanyard - Stainless steel - Offers greater rotation - Delrin insert provides smooth, rattle-free canvas top operation - A variety of tube, deck and side mounting options - Features and Benefits: - Patented ball and socket pivot design offers full rotation - Delrin insert provides tight, rattle-free fir and smooth operation - Quick release pull and D-ring pin - Polished finish - Secure fit
|
|
|
|
|
|
|
|
|
|
|
|
|
Bow Eye (SeaDog) - Machined 304 Stainless Steel - Comes with adjustable finish nuts as compared to the crimped ring used on most other bow eyes - Works with Lift Eye 048350 - Threads: 1/2" NC - A: 1/2" - B: 3-7/16" - C: 1-3/8" - D: 5-5/16" - E: 1-7/8" - B.S.: 28,000 lbs.
|
Deck Pipe (Chain & Rope) (Whitecap) - Hinged - CP/Brass - Inside Diam.: 1/2" - Flange: 3" - Fastener: #10 (4) - Max. Rope Size: 3/4" D - To lock into place simply slide the top to the right
|
Stern Eye (SeaDog) - Machined 304 Stainless Steel - Comes with adjustable finish nuts as compared to the crimped ring used on most other stern eyes - Has cut threads - Plate Size: (plate 1) 3" x 3/4", (plate 2) 3-1/2" x 1-1/2" - Thread: 1/2" NC - A: 1/2" - B: 4-3/4" - C: 1-3/8" - D: 6-5/8" - E: 1-7/8" - B.S.: 28,000 lbs.
|
|